Interfaces Description; Ethernet Accessory; Connectors; Indication Leds - WEG SCA06 User Manual

3

INTERFACES DESCRIPTION

The SCA06 servo drive uses an accessory to provide a Ethernet interface for communication.
3.1

ETHERNET ACCESSORY

NOTE!
There are 3 different accessories, according to the specified communication protocol:
ECO5: EtherNet/IP protocol.
ECO6: Modbus TCP protocol.
ECO7: PROFINET IO protocol.
It is important to use the accessory model according to the desired protocol for application.
3.2

CONNECTORS

The accessory for Ethernet communication has two RJ45 connectors for network connection. The connector pin
out follows the Fast Ethernet 100BASE-TX standard, using two pairs of cables for data transmission and reception.
The housings of the Ethernet connectors, which are normally connected to the cable shield, have connections be-
tween themselves and to the protective earth via an RC circuit.
3.3

INDICATION LEDS

The Ethernet accessory has an LED indicator on the Ethernet port, and two bi-color status LEDs. These LEDs have
the following functions and indications:
Supplied items:
– Installation guide.
– Ethernet accessory.
Interfaces Description
SCA06 | 9