P0816 - Gateway 1; P0817 - Gateway 2; P0818 - Gateway 3; P0819 - Gateway 4 - WEG SCA06 User Manual

The following table shows the allowed values for the CIDR notation and equivalent dot notation for the subnet mask:
NOTE!
For the changes in this parameter be effective, the equipment must be powered off and on again, or
an update must be performed by P0849.
P0816 – GATEWAY 1
P0817 – GATEWAY 2
P0818 – GATEWAY 3
P0819 – GATEWAY 4
Range:
Properties:
Description:
If P0810 = 0 (parameters), these parameters allow you to program the IP address of the default gateway for the
Ethernet modules. For other option of P0810, these parameters have no function.
Each parameter programs one octet of the gateway address, where the P0816 is the most significant octet. The
programmed gateway IP address, then, has the format "P0816.P0817.P0818.P0819".
NOTE!
For the changes in this parameter be effective, the equipment must be powered off and on again, or
an update must be performed by P0849.
P0820 ... P0831 – ETHERNET READ WORDS #5 ... #16
Range:
Properties:
Description:
These parameters allow programming the number of read words (inputs: slave → master), as well as the content of
Table 5.5: P0815 options
CIDR Sub-net mask
1 128.0.0.0
2 192.0.0.0
3 224.0.0.0
4 240.0.0.0
5 248.0.0.0
6 252.0.0.0
7 254.0.0.0
8 255.0.0.0
9 255.128.0.0
10 255.192.0.0
11 255.224.0.0
12 255.240.0.0
13 255.248.0.0
14 255.252.0.0
15 255.254.0.0
16 255.255.0.0
0 ... 255
RW, ETH
0 ... 9999
RW, ETH
CIDR Sub-net mask
17 255.255.128.0
18 255.255.192.0
19 255.255.224.0
20 255.255.240.0
21 255.255.248.0
22 255.255.252.0
23 255.255.254.0
24 255.255.255.0
25 255.255.255.128
26 255.255.255.192
27 255.255.255.224
28 255.255.255.240
29 255.255.255.248
30 255.255.255.252
31 255.255.255.254
Parameterization
Default: 0.0.0.0
Default: 0
SCA06 | 18