Toshiba PORTÉGÉ X20W-D User Manual page 142

Hide thumbs Also See for PORTÉGÉ X20W-D:
Table of Contents

Advertisement

Overheating your product or AC adaptor could cause system failure,
product or AC adaptor damage or a fire, possibly resulting in serious
injury.
Avoid liquids, moisture and foreign objects
Never allow any liquids to spill into any part of your product, and never
expose your product to rain, water, seawater or moisture. Exposure to
liquid or moisture can cause electric shock or fire, resulting in damage or
serious injury. If any of these eventualities should accidentally occur,
immediately:
1. Turn off your product.
2. Disconnect the AC adaptor from the power plug socket and product.
3. Remove the battery pack (for models with the removable battery pack).
Do not turn on the power again, until you have taken your product to an
authorized service center. Failure to follow these instructions could result
in serious injury or permanent damage to your product.
Never allow metal objects, such as screws, staples and paper clips, to enter
your product or keyboard. Foreign metal objects can create a short circuit,
which can cause product damage and fire, possibly resulting in serious
injury. If a metal object should accidentally enter your product,
immediately:
1. Turn off your product.
2. Disconnect the AC adaptor from the power plug socket and product.
3. Remove the battery pack (for models with the removable battery pack).
4. Disconnect all cables from connectors (if any).
Do not turn on the power again, until you have taken your product to an
authorized service center. Failure to follow these instructions could result
in serious injury or permanent damage to your product.
Avoid moist or damp environments
Never use or place your product in a bathroom or any other damp
environment or in an outdoor environment or location where it may be
exposed to rain, mist, fog or other source of water or moisture. Such
exposure could cause a fire or electric shock, possibly resulting in serious
injury. It may also cause a product failure, or loss of data.
Do not use liquid cleaners or aerosol cleaners
Always turn off the power and unplug the product from the electrical outlet
before cleaning. The injected combustible gas produced by these types of
cleaners may remain inside of your product. The electrostatic spark from
the motor or contact point of switch may ignite the gas residue, which
Main Unit
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents