Toshiba PORTÉGÉ X20W-D User Manual page 139

12
Communication
automatic doors or fire detectors. Radio waves can cause malfunction of
such equipment, possibly resulting in serious injury.
Turn Wi-Fi or Bluetooth or Wireless WAN Functionalities off
in aircraft
❖
Turn off the Wi-Fi or Bluetooth or Wireless WAN functionality in aircraft
or in places that generate or can generate radio interference. Radio waves
can potentially affect them, causing an accident due to malfunction.
Check if a car has adequate electromagnetic compatibility
when using your product in a car
❖
When using your product in a car, check with the automobile dealer if the
car has an adequate electromagnetic compatibility (EMC). Radio waves
from your product can potentially hamper safe driving. Depending on car
model, your product can rarely affect car electronic equipment if it is used
in a car.
Turn off the power to your product when it is interfering with
radio equipment
❖
If your product interferes with radio equipment, turn your product power
off immediately. Such interference could cause equipment malfunction.
Do not use the product near a microwave oven
❖
Do not use your product in the places near a microwave oven where a
magnetic field generates and places where static electricity or radio
interference generates.
Ensuring Wireless Network Security
❖
A wireless LAN can greatly enhance the flexibility of your LAN
configuration and operations. You can exchange data between products and
other devices on the LAN without the restrictions inherent in cabling.
Toshiba strongly recommends that you take appropriate steps to ensure that
the proper security is in place whenever you use a wireless connection to
protect your privacy and guard against identity and/or data theft. However,
please note that even with security settings activated, experienced
malicious hackers may still be able to gain access to your network and/or
secured data.
The Access Point (AP) security settings determine the wireless network
security, not your wireless product. If the AP has not been configured for
security, then your wireless product will not be able to use those features.
Additionally, your wireless product's security settings must match those of