Working Safely With The Universal Hook; Forward / Reverse; Changing The Accessory Tool; Types Of Work - Hilti SD 2500 User Manual

5.1.2 Working safely with the universal hook

▶ Before beginning the work, make sure that the universal hook is securely attached to the screwdriver.
▶ Use the universal hook only when necessary. Lay the screwdriver down in a safe place when it is not in
use for a long period.

5.1.3 Forward / reverse

Note
The control switch is locked when the forward / reverse switch is in the middle position (safety lock).
▶ Set the forward / reverse selector switch to forward or reverse rotation.

5.2 Changing the accessory tool.

1. Pull the depth gauge away from the power tool, releasing the snap-on connection.
2. Push the chuck towards the screwdriver, turning the chuck slightly at the same time, and then hold it in
this position.
3. Remove the accessory tool with your other hand.
4. Insert the desired accessory tool in the chuck, pushing it into the screwdriver as far as it will go.

5.3 Types of work

Observe the safety instructions and warnings in this documentation and on the product.
Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 01 Printed: 20.04.2017 | Doc-Nr: PUB / 5135890 / 000 / 02
English 7