F. Detailed guide to the Cine El Mode
F1.2 Exposing via an MLUT, suggested settings
Recommendation: Enable MLUT's for SDI2, HDMI and
Viewfinder. Ensure that the MLUT is OFF for SDI1 & Internal
Rec. (MENU: Video – Monitor LUT).
Recommendation: Use LUT Category – LUT, LUT Select –
P1:709(800). (MENU: Video – Monitor LUT).
Recommendation: Set the Exposure Index switch settings
as follows:
(MENU: Camera – ISO/Gain/EI).
Exposure Index<H> 2000, Exposure Index<M> 800,
Exposure Index<L> 640.
Set the L/M/H gain/EI switch to M (800EI) for general
purpose shooting. Use H (2000EI) for very bright, high key
scenes with few shadows. Use L (640EI) for scenes with
few highlights where shadow information is important.
Expose by looking at the viewfinder image with the
MLUT applied. For the 709(800) MLUT use conventional
exposure levels, for example Zebra 1 at 70% for skin tones.
Contents
54