Sony PXW-FS7 Quick Reference Manual page 56

F. Detailed guide to the Cine El Mode
F1.3 The Video Signal Monitor can be used to measure
either the MLUT level or the Internal Recording level.
I recommend measuring and monitoring the MLUT level
for the correct operation of the Cine EI mode
(MENU: VF – Video Signal Monitor – Source – SDI2)
Note that if the SDI output is disabled, selecting the source
as SDI2 will still allow you to monitor the MLUT levels as
seen in the viewfinder. The Video Signal Monitor source is
indicated just above the Video Signal Monitor.
The viewfinder image with the 709(800) MLUT applied, correctly
exposed. Note the indications for what is being recorded and what is
being measured by the Video Signal Monitor.
Contents
56