G. Slow Motion, Time-lapse and picture cache
G1.2 Full Scan
Uses the full sensor so there is no change to the field of
view. However due to the way the sensor is read when
shooting HFR, in certain circumstances there may be
unwanted artifacts in the footage such as colored
rainbow like patterns (moiré) or jagged edges in high
contrast areas.
G1.3 Center Scan
Uses only the center portion of the sensor. This eliminates
the unwanted artefacts that may be present in full
scan HFR, but results in a field of view 2x narrower than
achieved with Full Scan.
Contents
Section Index
68