Table of Contents
Advertisement
Symbol shown on
map
Changing the way you are warned
Important: The Safety cameras service is only available in Australia.
To change the way you are warned about safety cameras, select the Sounds and Warnings button in
the Settings menu.
Symbol shown in
route bar
Description
Fixed camera - this type of camera checks the
speed of passing vehicles and is fixed in one
place.
Average speed zones - these types of cameras
measure your average speed between two
points. You are warned at the start and end of
the average speed check area.
While you are driving in an average speed check
area, your average speed is shown, instead of
your current speed. The distance to the end of
the area is shown in the route bar.
Speed enforcement zones - these zones can
contain multiple safety cameras.
You are warned at the start and end of a speed
enforcement zone. While you are driving in a
speed enforcement zone, your current speed is
shown, and a visual warning is shown in the
route bar.
Red light camera - this type of camera checks
for vehicles breaking traffic rules at traffic
lights. There are two types of traffic light
camera - those which check if you drive through
a red light and those which check for driving
through a red light together with speeding.
Traffic restriction - this type of warning warns
you about restricted roads.
Accident hotspots - this type of warning is given
for a place where road traffic accidents have
historically been concentrated.
You are warned at the start and end of the
accident hotspots. While you are driving in an
accident hotspots, your current speed is shown
and a visual warning is shown in the route bar.
52
Advertisement
Table of Contents
