Deleting Measurements - Microlife WatchBP Home A Instructions Manual

In «USUAL» mode
1. When the M button is pressed, the number of readings. detected
with Afib are displayed.
2. Press M button again, the number of total readings stored, e.g.
N=63, is displayed; followed immediately by the average of all
measurements stored in memory.
3. All individual readings can be viewed by repeatedly pressing the
M button.
WatchBP Home A
Individual reading

Deleting measurements

Data from «DIAG.» and «USUAL» mode can be deleted independent
of each other.
Ask your doctor if the measurement data is still required, before
deleting data. Only delete the stored measurements when you
are sure that you no longer need the data.
19 EN