Microlife WatchBP Home A Instructions Manual page 18

In «DIAG.» mode
1. When the M button is pressed, it briefly displays the total number
of measurements stored, e.g. N=20 and then switches to the
average of all readings.
«A» is displayed when the
number shown is the average
of all data.
18
«- -» will display when the
number of measurements is
less than 12.
2. Press the M button again to display the average of all morning
data. Press the M button once again to show the average of all
evening data.
3. Press the M button repeatedly to review all the individual readings
one by one.
4. The daily average is displayed after the individual readings of the
day.