Installation - Viking VUWC244DRSS Service Manual

5.4.2 Installation of a new Evaporator
1) The new evaporator will come as an assembly which includes the suction and capillary lines. A
filter / drier will also be included.
2) Reverse the above procedure to reinstall the evaporator and divider assemblies.
3) Install and solder a new filter / drier.
4) Install and solder a new process tube to compressor.
5) Install and solder the suction line into compressor.
6) Carefully slide mechanical base plate assembly back under cabinet
7) Screw mechanical base plate assembly and front grille to cabinet (See figures 12.4, 12.5, and
12.6).
8) Evacuate, change, and leak check system.
SEE PHOTO SECTION FOR REFERENCE TO ABOVE MENTIONED FIGURES
2010 - Viking Preferred Service
32
SMR-0005