shall be used if required by NFP -70 (National Electric Code), federal/state/local laws, or local ordinances. If the use of a GFI is required Cabinet Cutout *Optional: Cutout for electrical outlet can be placed in adjacent cabinetry.
Page 5
Remove these screws to seperate Anti-Tip device upper and lower sections of anti-tip bracket. FIGURE 4 To wall FIGURE 3 To Refrigerated Drawer Cabinet 1/4” Lag screws into wall...
™ PRESS AND HOLD Function Function Access Function Function Access Turn Unit On & Off Turn Unit On & Off Pressing and holding the keypad Pressing and holding the keypad for 5-seconds will turn the unit “ON” or “OFF”. for 5-seconds will turn the unit “ON” or “OFF”. To adjust temperature set-point, touch Adjust Temperature Set-Point Adjust Temperature Set-Point...
Page 11
4 times. If the product is at fault, the error code will appear again, and you should contact your Dealer or Viking Customer Service to schedule service by a should contact your Dealer or Viking Customer Service to schedule service by a qualified technician.