How To Use This Manual - Prochem LEGEND GT Operating Instructions Manual

This manual contains the following sections:

HOW TO USE THIS MANUAL

-
SAFETY
-
SYSTEMS
-
OPERATIONS
-
MAINTENANCE & SERVICE
-
PARTS LIST
-
The HOW TO USE THIS MANUAL section will tell
you how to find important information for ordering
correct repair parts.
Parts may be ordered from authorized dealers.
When placing an order for parts, the machine model
and machine serial number are important. Refer to
the MACHINE DATA box which is filled out during
the installation of your machine. The MACHINE
DATA box is located on the inside of the front cover
of this manual.
MODEL _______________________________________
DATE OF PURCHASE __________________________
SERIAL NUMBER ______________________________
SALES REPRESENTATIVE # _____________________
The model and serial number of your machine is on
the side approximately where shown.
The SAFETY section contains important information
regarding hazard or unsafe practices of the
machine. Levels of hazards are identified that could
result in product or personal injury, or severe injury
resulting in death.
The OPERATIONS section is to familiarize the
operator with the operation and function of the
machine.
The MAINTENANCE section contains preventive
maintenance to keep the machine and its
components in good working condition. They are
listed in this general order:
The PARTS LIST section contains assembled parts
illustrations and corresponding parts list. The parts
lists include a number of columns of information:
NOTE: If a service or option kit is installed on
your machine, be sure to keep the KIT
INSTRUCTIONS which came with the kit. It
contains replacement parts numbers needed for
ordering future parts.
NOTE: The number on the lower left corner of
the front cover is the part number for this
manual.
86313050 LEGEND GT 09/12/08
HOW TO USE THIS MANUAL
- Engine
- Vacuum Pump
- Water Pump
- Drive Belts, Pulleys & Hubs
Chemical Pump
-
- Hoses
- Vac/Exhaust Heat Exchanger
General Service Adjustments
-
Troubleshooting
-
- REF – column refers to the reference
- number on the parts illustration.
- PART NO. – column lists the part number
for the part.
- PRV NO. – Reference number.
- QTY – column lists the quantity of the
part used in that area of the machine.
-
- DESCRIPTION – column is a brief
- description of the part.
SERIAL NO. FROM – If this column has an
-
(*) and a Reference number, see the
SERIAL NUMBERS page in the back of your
manual. If column has two asterisk (**), call
manufacturer for serial number. The serial
number indicates the first machine the part
number is applicable to. The main illustration
shows the most current design of the
machine. When a boxed illustration is
shown, it displays the older design.
NOTES – column for information not noted
-
by the other columns.
1-1