List Of Other Optional Components - Konica Minolta bizhub C658 Quick Start Manual

2.3 About this machine
No. Name
25 Finisher FS-536
26 Finisher FS-536 SD
27 Punch Kit PK-520
28 Relay Unit RU-513
29 Finisher FS-537 SD
30 Finisher FS-537
31 Punch Kit PK-523
32 Z Folding Unit ZU-609
33 Post Inserter PI-507
34 Job Separator JS-602

List of other optional components

The following options are built into this machine and are not shown in the figure.
No. Name
1 Stamp Unit SP-501
2 Spare TX Marker
Stamp 2
3 Local Interface Kit
EK-608
4 Local Interface Kit
EK-609
5 Video Interface Kit VI-
510
6 i-Option LK-102 v3
bizhub C658/C558/C458/C368/C308/C258
Description
Sorts, groups and staples printed paper before outputting it.
To install the Finisher FS-536, the Relay Unit RU-513 is required. Al-
so, Desk DK-510, Paper Feed Cabinet PC-415, Paper Feed Cabi-
net PC-115, or Paper Feed Cabinet PC-215 must be installed on this
machine.
Sorts, groups, staples, folds, and binds printed paper before output-
ting it.
To install the Finisher FS-536 SD, the Relay Unit RU-513 is required.
Also, Desk DK-510, Paper Feed Cabinet PC-415, Paper Feed Cab-
inet PC-115, or Paper Feed Cabinet PC-215 must be installed on
this machine.
The Finisher FS-536 contains the Saddle Stitcher.
Install this unit onto the Finisher FS-536/FS-536 SD.
This unit supports the punching function.
This unit is required to install the Finisher FS-537/FS-537 SD/FS-
536/FS-536 SD on this machine.
Sorts, groups, staples, folds, and binds printed paper before output-
ting it.
To install the Finisher FS-537 SD, the Relay Unit RU-513 is required.
Also, Desk DK-510, Paper Feed Cabinet PC-415, Paper Feed Cab-
inet PC-115, or Paper Feed Cabinet PC-215 must be installed on
this machine.
The Finisher FS-537 contains the Saddle Stitcher.
Sorts, groups and staples printed paper before outputting it.
To install the Finisher FS-537, the Relay Unit RU-513 is required. Al-
so, Desk DK-510, Paper Feed Cabinet PC-415, Paper Feed Cabi-
net PC-115, or Paper Feed Cabinet PC-215 must be installed on this
machine.
Install this unit onto the Finisher FS-537/FS-537 SD.
This unit supports the punching function.
Install this unit onto the Finisher FS-537/FS-537 SD.
This unit supports the Z-fold function.
Install this unit onto the Finisher FS-537/FS-537 SD.
This unit allows you to insert cover sheets into the copied or printed
sheets. This unit also allows you to manually operate the finisher (only
the lower tray is available).
Install this unit onto the Finisher FS-537/FS-537 SD.
This unit sorts printed sheets.
Description
Stamps a scanned original when sending a fax. This unit allows you
to check that the original has been scanned.
A replacement stamp for the Stamp Unit SP-501.
Install this unit when using the voice guidance function.
The speaker and USB port are added.
Install this unit when using the voice guidance function or the connec-
tion function with a Bluetooth LE-compatible iOS terminal.
The speaker, USB port, and receiving device for Bluetooth LE com-
munication are added.
For details on the association with an iOS terminal, refer to the User's
Guide CD.
This unit is required to install Image Controller IC-416.
Supports the PDF processing function that is one of the advanced
functions.
2
2-9