Thermostat - Subaru impreza 2001 Service Manual
Hide thumbs
Also See for impreza 2001:
- Owner's manual (316 pages) ,
- Service manual (189 pages) ,
- Service manual (43 pages)
Table of Contents
Advertisement
6. Thermostat
A: REMOVAL
1) Lift-up the vehicle.
2) Remove under cover.
3) Drain engine coolant completely. <Ref. to CO-
25, DRAINING OF ENGINE COOLANT, RE-
PLACEMENT, Engine Coolant.>
4) Disconnect radiator outlet hose from thermostat
cover.
• Non-Turbo model
5) Disconnect radiator outlet hose.
• Turbo model
THERMOSTAT
6) Remove thermostat cover and gasket, and pull
out the thermostat.
B: INSTALLATION
1) Install the thermostat in the water pump, and in-
stall the thermostat cover together with a gasket.
CAUTION:
• When reinstalling the thermostat, use a new
EN0073
gasket.
• The thermostat must be installed with the jig-
gle pin (A) facing to front side.
• At this time, set the jiggle pin of thermostat
for front side.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
EN0112
2) Fill coolant. <Ref. to CO-25, FILLING OF EN-
GINE COOLANT, REPLACEMENT, Engine Cool-
ant.>
EN0107
CO-35
COOLING
G2M0214
EN0100
Advertisement
Table of Contents
