Chrysler Pacifica CS 2004 Service Manual page 74

Table of Contents

Advertisement

DRIVEABILITY - NGC
P0116-ENGINE COOLANT TEMPERATURE PERFORMANCE —
TEST
6
Turn the ignition off.
Disconnect the ECT harness connector.
Disconnect the PCM harness connector.
CAUTION: DO NOT PROBE THE PCM HARNESS CONNECTORS. PROBING
THE PCM HARNESS CONNECTORS WILL DAMAGE THE PCM TERMI-
NALS RESULTING IN POOR TERMINAL TO PIN CONNECTION. INSTALL
MILLER SPECIAL TOOL #8815 TO PERFORM DIAGNOSIS.
Measure the resistance of the (K4) Sensor ground circuit from the ECT Sensor
harness connector to the appropriate terminal of special tool # 8815.
Is the resistance below 5.0 ohms?
Yes → NOTE: Before continuing, check the PCM harness connector
→ Repair the open in the (K4) Sensor ground circuit.
No
7
Disconnect the ECT Sensor harness connector.
Turn the ignition off.
Disconnect the PCM harness connector.
Measure the resistance between ground and the (K2) ECT Signal circuit in the ECT
Sensor harness connector.
Is the resistance below 100 ohms?
Yes → Repair the short to ground in the (K2) ECT Signal circuit.
→ Go To 8
No
8
Turn the ignition off.
Disconnect the ECT Sensor harness connector.
Disconnect the PCM harness connector.
Measure the resistance between the (K2) ECT Sensor Signal circuit and the (K4)
Sensor ground circuit at the ECT Sensor harness connector.
Is the resistance below 5.0 ohms?
Yes → Repair the (K4) Sensor ground shorted to the (K2) ECT Sensor
→ NOTE: Before continuing, check the PCM harness connector
No
ACTION
terminals for corrosion, damage, or terminal push out. Repair as
necessary. Replace and program the Powertrain Control Module
in accordance with the Service Information.
Perform POWERTRAIN VERIFICATION TEST VER - 5 - NGC.
Perform POWERTRAIN VERIFICATION TEST VER - 5 - NGC.
Perform POWERTRAIN VERIFICATION TEST VER - 5 - NGC.
Signal circuit.
Perform POWERTRAIN VERIFICATION TEST VER - 5 - NGC.
terminals for corrosion, damage, or terminal push out. Repair as
necessary. Replace and program the Powertrain Control Module
in accordance with the Service Information.
Perform POWERTRAIN VERIFICATION TEST VER - 5 - NGC.
68
Continued
APPLICABILITY
All
All
All

Advertisement

Table of Contents
loading

Table of Contents