Table of Contents
Advertisement
DRIVEABILITY - NGC
P1593-SPEED CONTROL SWITCH STUCK —
TEST
6
NOTE: Before continuing, check the PCM harness connector terminals for
corrosion, damage or terminal push out. Repair as necessary.
Using the schematics as a guide, inspect the wire harness and connectors. Pay
particular attention to all Power and Ground circuits.
If there are no possible causes remaining, view repair.
Repair
ACTION
Replace and program the Powertrain Control Module per Service
Information.
Perform POWERTRAIN VERIFICATION TEST VER - 4 - NGC.
Continued
262
APPLICABILITY
All
Advertisement
Table of Contents
