Table of Contents
Advertisement
3.5 Peripherals Setup
This option controls the configuration of the board's chipset. Control keys for this
screen are
the same as for the previous screen.
Note: The control keys are listed at the bottom of the menu. If you need any help with the item fields,
you can press the <F1> key, and the relevant information will be displayed.
Option
Onboard Serial Port 1
Onboard Serial Port 2
Onboard Serial Port 3
Onboard Serial Port 4
Onboard Serial Port 5
USB Device Setting
On chip IDE DEVICE
Choice
Serial Port 1: 3F8 / IRQ4
Serial Port 2: 2F8 / IRQ3
Serial Port 3: 3E8 / IRQ11
Serial Port 4: 2E8 / IRQ10
Serial Port 5: 4F8 / IRQ11
48
Description
Select an address and the
corresponding interrupt for each
serial port.
Select your system contains a
Universal Serial Bus (USB)
controller and you have USB
peripherals.
The integrated peripheral controller
contains an IDE interface with
support for two IDE channels.
Revision: 1.0
Advertisement
Table of Contents
