Table of Contents
Advertisement
3.4 PnP/PCI Setup
The option configures the PCI bus system. All PCI bus system on the system use INT#,
thus
all installed PCI cards must be set to this value.
Note: The control keys are listed at the bottom of the menu. If you need any help with the item fields,
you can press the <F1> key, and the relevant information will be displayed.
Item
Reset Configuration
Data
Resources
Controlled By
Option
Normally, you leave this field Disabled.
Select Enabled to reset Extended System
Configuration Data (ESCD) when you
Enabled
exit Setup. If you have installed a new
Disabled
add-on and the system reconfiguration has
caused such a serious conflict, then the
operating system cannot boot.
The Award Plug and Play BIOS has the
Auto(ESCD)
capacity to automatically configure all of the
Manual
boot and Plug and Play compatible devices.
However, this capability means absolutely
46
Revision: 1.0
Description
Advertisement
Table of Contents
