Related Manuals for Acrosser Technology AR-V5430FL
Summary of Contents for Acrosser Technology AR-V5430FL
- Page 1 Revision: 1.0 AR-V5430FL Installation Guide Revision Description Date Release 2009/07/24...
-
Page 2: Table Of Contents
Revision: 1.0 Contents Introduction to AR-V5430FL……………………………………………………... 3 1.1 Specifications..………………………………………………….………….…. 3 1.2 Packing List…………………………………………………………………… 4 1.3 System Dissection ………………………………………………...…………. 5 Procedure of Assembly/Disassembly…………..………………………………. 7 2.1 HDD Installation .………………………...…….......... 7 2.2 Accessory(SO-DIMM, CF Card, SIM Card, Outline Bracket) Installation 13 2.3 GPS/GPRS/WiFi Modules Installation .………..…………………....17... -
Page 3: Introduction To Ar-V5430Fl
Revision: 1.0 1 Introduction to AR-V5430FL AR-V5430FL is a Fan-less system product mainly for vehicles industry PC applications. With powerful Intel CPU core & diverse memory card extension ( CF card, SO-DIM), AR-V5430FL can satisfy the users requirements in any vehicles industry applications environment, especially in vehicles computer fields. -
Page 4: System Dissection
Revision: 1.0 System Dissection (1) Dimensions (2) Front Panel “I/O” Antenna Inlet Power Switch GPIO by DB15 Power-on status Speaker/Mic/Remote Fuse DC Inlet COM1/COM2 LAN1/LAN2 CF Card/USB/KB/MS/HDD&POWER LED... - Page 5 Revision: 1.0 (3) System Configuration...
- Page 6 Revision: 1.0 Item Description Quantity Upper Case Bottom Case Thermal Module Mounting Bracket CF Card Bracket GPIO Board HDD Module GPS &GPRS Module WiFi Module DDRII Lid Lock modules of bracket GPS/GPRS/WiFi Antenna Inlet Fuse 15A for 12V vehicles (default value)
-
Page 7: Procedure Of Assembly/Disassembly
2 Procedure of Assembly/Disassembly 2.1 2.5” Hard Disk Installation The following instructions will guide you to install HDD step-by-step. 1. Remove the terminal plug from the AR-V5430FL. Unfasten the screw from top cover of AR-V5430FL. Unfasten the screw!! Remove the external power adapter!! - Page 8 Revision: 1.0 3. Remove top cover by below photo direction. Remove Push Push...
- Page 9 Revision: 1.0 4. Insert the rubbers into the HDD bracket. Install the rubbers on the HDD bracket. 5. Place HDD body into HDD bracket and assemble HDD and bracket by 4 screws. Screws up 6. Insert SATA connecter and SATA power cable into HDD module.
- Page 10 Revision: 1.0 7. Assemble the HDD module and HDD bracket by 4 screws. Screws up...
- Page 11 Revision: 1.0 8. Place HDD module back into the case. 9. Fix HDD module to the chassis by four screws. The installing of bracket for HDD...
- Page 12 Revision: 1.0 10. Plug SATA cable and power cable into mainboard. SATA Power connecter SATA Connecter 11. Slide the top cover into the bottom chassis. Pay attention to make sure top cover has been installed into the notch!
- Page 13 Revision: 1.0 12. Finish the HDD installation after fastening the screw. Push Push Fasten the screw...
-
Page 14: Accessory(So-Dimm, Cf Card, Sim Card, Outline Bracket) Installation
Revision: 1.0 2.2 Accessory (SO-DIMM, CF card, SIM Card, Outline bracket) Installation Install SO-DIMM 1. Remove the extending door by unfastening the screw. Unfasten screw when installing the SO-DIMM card. 2. Install SO-DIMM following below instructions. Push Insert the SO-DIMM Push... - Page 15 Revision: 1.0 Install CF Card 1. Remove the extending CF’s bracket by unfastening the screws. Unfasten the screws 2. Install CF card into bracket. The direction for installing the CF card. 3. Install CF card module back to CF socket. The direction for installing the CF card module.
- Page 16 Revision: 1.0 Install SIM Card 1. Install SIM card into the SIM socket.
- Page 17 Revision: 1.0 Install Outline Bracket 1. Install fasteners with case by 4 screws. 2. Install fasteners’ another side with Outline bracket by 4 screws. 3. Lock the these fasteners.
-
Page 18: Gps/Gprs/Wifi Modules Installation
Revision: 1.0 2.3 GPS/GPRS/WiFi Modules Installation Unfasten 2 screws to release GPS/GPRS brackets. Unfasten the screws. After GPS/GPRS bracket release, please install GPS/GPRS with bracket by fastening 4 screws. - Page 19 Revision: 1.0 Install GPS/GPRS modules into chassis by fastening 2 screws as step 1. Unfasten 2 screws to release WiFi bracket. Unfasten the screws. 5. After WiFi bracket release, please install WiFi with bracket by fastening 2 screws. 6. Install Wifi modules into chassis by fastening 2 screws as step 4.
-
Page 20: Appendix
Revision: 1.0 3 Appendix Please don’t change CPU by yourself. Any disassembly and assembly behavior for the CPU thermal module will cause unexpected damage. Please do contact with Acrosser customer service center/FAE of changing CPU. Please DON’T disassemble and assemble the thermal module by yourself...