Mechanism Removal - Epson DFX-9000 Repair Manual

Epson DFX-9000 Field Repair Guide

Mechanism Removal

Note: Perform the Upper Case Removal procedure before performing the steps below. Steps 2 - 4 refer
to "Rear Grabs", "Tilt Bar", and "Grommet". Refer to the figure below for the location of these
items.
When performing Step 4, ensure that the Tilt Bar is positioned as indicated in the figure below to
prevent damage to the wiring harness located near the Grommet.
Component Replacement
Front and Rear "Grabs"
Place bottom of
Tilt Bar here
Printer Component, Software Item,
Place
Place bottom of
Tilt Bar in the
small square area
LCD Display, Printer Button
3/29/07
Page 16.