Epson DFX-9000 Repair Manual page 221

Epson DFX-9000 Field Repair Guide
15. If the .40mm feeler gauge will easily fit between the Print Head and the Platen, the gap is too wide. Loosen
Screw C about 1/8 of a turn. To adjust the gap, insert a flat blade screwdriver into the opening to the right of
Screw C. Twist the screwdriver to change the gap. To decrease the gap, move the Upper Angle Bar
downwards. Tighten Screw C when the adjustment is correct.
Screw B
Screw A
Screw C
Printer Component, Software Item,
Upper Angle Bar
LCD Display, Printer Button
3/29/07
Page 212.