Settings Menu; Project; Load Project; Save Project As - Elektron Digitakt User Manual

15. SETTINGS MENU

15. SETTINGS MENU
The SETTINGS menu offers settings that affect Digitakt and can also be used to manage Projects.
Press [SETTINGS] to access the SETTINGS menu. Scroll the list by using [UP]/[DOWN] or the LEVEL
knob. Open a highlighted menu by pressing [YES].

15.1 PROJECT

15.1.1 LOAD PROJECT

Load Project opens a project selection screen where you can choose a project to load. Note that the ac-
tive project will not be saved before loading the new project so remember to save the active project first.
If you wish to create a new project, select CREATE NEW at the very bottom of the list. The new project
will be a blank slate.
If you load a new project it will overwrite the active project. Be sure to save your active
project before you load another project.

15.1.2 SAVE PROJECT AS

Save Project opens a project selection screen where you choose a slot to save the active project to.
You can also press [FUNC] + [SETTINGS] to access this screen.

15.1.3 MANAGE PROJECTS

Manage Projects launches the PROJECT MANAGER menu. Selecting a project in this menu and pressing
the [RIGHT] arrow key will bring up a list of commands.
• CLEAR Resets the project slot to a clean state.
• DELETE Removes the project from the slot.
• RENAME Opens a NAMING screen where you can rename the project file.
• LOAD FROM Loads the selected project. This will overwrite the active project!
• SAVE TO Saves the active project to the selected slot.
• TOGGLE Toggles write protection on or off. Write protected projects cannot be overwritten, re-
named or erased. A lock symbols in front of the project name shows that the project is write protected.
• INIT NEW Initializes an empty file slot with a clean project. This option is only available for empty
project slots.

15.2 SAMPLES

Here you can manage your samples. Initially, here are three directories FACTORY, INCOMING, and
RECORDED. A wide array of preset samples are available in the write protected FACTORY directory.
The INCOMING directory is the default destination for samples sent to the Digitakt +Drive storage via the
C6 software. RECORDED will contain the samples you create when you sample with the Digitakt.
52