Table of Contents
Advertisement
10. THE SEQUENCER
10.5 PATTERN MENU
Use the PATTERN menu to perform pattern management. Press [PATTERN] to open the menu. Use the
[UP] and [DOWN] arrow keys to move between the options. Press [YES] to confirm your selection. Exit the
menu by pressing [NO].
10.5.1 RENAME
Opens a NAMING screen where you can rename the active pattern.
10.5.2 CLEAR
• WHOLE PATTERN Clears the active pattern's sequencer data and kit. A prompt appears when you
select this option. Press [YES] to clear, or [NO] to cancel the operation. Note that no pattern informa-
tion will be permanently lost until the pattern is saved to the same pattern slot that it was loaded from.
• KIT DATA Clears the active pattern's kit. All sequencer data will remain unchanged. A prompt ap-
pears when you select this option. Press [YES] to clear, or [NO] to cancel the operation. Note that no
kit information will be permanently lost until the pattern is saved to the same pattern slot that it was
loaded from.
• SEQUENCE DATA Clears the active pattern's sequence data. All sounds will remain unchanged. A
prompt appears when you select this option. Press [YES] to clear, or [NO] to cancel the operation.
Note that no sequencer information are permanently lost until the pattern is saved to the same pattern
slot it was loaded from.
10.5.3 SAVE TO PROJ
You must have saved the project at least once before you can save pattern information.
• WHOLE PATTERN Saves the active pattern's sequence data and kit to the +Drive. A prompt appears
when you select this option. Press [YES] to save, or [NO] to cancel the operation.
• KIT DATA Saves the active pattern's kit to the +Drive. A prompt appears when you select this option.
Press [YES] to save, or [NO] to cancel the operation.
• SEQUENCE DATA Saves the active pattern's sequence data to the +Drive. A prompt appears when
you select this option. Press [YES] to save, or [NO] to cancel the operation.
10.5.4 RELOAD FROM PROJ
You must have saved the pattern at least once before you can reload pattern information.
• WHOLE PATTERN Reloads the active pattern's sequence data and kit from the +Drive. A prompt will
appear when you select this option. Press [YES] to reload, or [NO] to cancel the operation.
• KIT DATA Reloads the active pattern's kit from the +Drive. A prompt appears when you select this
option. Press [YES] to reload, or [NO] to cancel the operation.
• SEQUENCE DATA Reloads the active pattern's all sequence data from the +Drive. A prompt appears
when you select this option. Press [YES] to reload, or [NO] to cancel the operation.
10.5.5 IMPORT/EXPORT
Here you can manage the sounds on the Digitakt.
• IMPORT SOUND Imports (copies) a sound from the +Drive to the active pattern. Turn the LEVEL
knob or press [UP]/[DOWN] to scroll through the list. Press [YES] to select a sound and then press
[TRACK 1–8] to select the track to where you want to assign the sound.
• EXPORT SOUND Exports (saves) the active track's sound to the +Drive. Turn the LEVEL knob or
press [UP]/[DOWN] to choose a destination memory slot. Press [YES] to export the sound. Name the
sound and press [YES] again to confirm the export.
• MANAGE SOUNDS Opens the SOUND MANAGER. For more information, please see "9.3 SOUND
MANAGER" on page 24.
30
Advertisement
Table of Contents
Need help?
Do you have a question about the Digitakt and is the answer not in the manual?