Trig Parameters Page; Quantize Menu; Metronome Menu; Scale Menu - Elektron Digitakt User Manual

10.6 TRIG PARAMETERS PAGE

Set the actions for when a note is trigged in the TRIG PARAMETERS page. Press the [TRIG] key to access
the menu. Change settings using the DATA ENTRY knobs. These general settings affect note trigs placed
on the sequencer. On any step of the pattern, trigs can be locked to other settings by first pressing and
holding a [TRIG] key, then changing the settings. For more information, please see "11.2 TRIG PARAME-
TERS PAGE" on page 36.

10.7 QUANTIZE MENU

Press [FUNC] + [TRIG] to access this menu. Change settings with DATA ENTRY knob E and F.
TRK. affects all micro-timed trigs of the active track in real time. The higher the quantize value, the more
all micro-timed trigs will be quantized. Press [TRIG 1-16] key to select track to quantize. (0–127)
GLOBAL affects all micro-timed trigs of all tracks in real time. The higher the quantize value, the more all
micro-timed trigs will be quantized. (0–127)
Press [FUNC] + [YES] to apply quantization to the pattern. Press [NO] to exit the menu.

10.8 METRONOME MENU

The METRONOME menu controls the internal metronome of the Digitakt. Press [FUNCTION] + [PTN] to
open the METRONOME menu. Use the DATA ENTRY knobs to change the settings.
ACTIVE activates/deactivates the metronome. You can also press [FUNC] + [PTN] and hold for a sec-
ond to toggle the metronome on and off when you are not in the METRONOME menu.
TIME SIG. controls the note and beat measure of the metronome time signature.
PREROLL BARS controls for how many bars the metronome will sound before the sequencer starts
playing. This setting is only relevant when you are in LIVE RECORDING mode.
VOL. controls the volume of the click.

10.9 SCALE MENU

The length and timing of the pattern and tracks is set in this menu. The SCALE menu has two modes. In
LENGTH PER PATTERN mode all tracks share the same length. In LENGTH PER TRACK mode each track
can have different lengths. Access the SCALE menu by pressing [FUNC] + [PAGE]. Press [FUNC] + [YES]
to toggle between the two SCALE modes. Use the DATA ENTRY knobs to adjust the different settings.

10.9.1 LENGTH PER PATTERN MODE

This is the default mode. In this mode, all tracks of the pattern share the same length and time signature.
10. THE SEQUENCER
31