Add Event - D-Link DCS-2670L User Manual

Section 3: Configuration
Create and schedule up to three events with their own settings here. After making your
changes, click the Save Settings button for them to take effect.
Event name: Enter a name for the event.
Enable this event: Select this box to activate this event.
Priority: Set the priority for this event. The event with higher priority will be
executed first.
Delay: Specify the delay time before allowing this event to be triggered again.
This is used for both motion detection events and digital input triggers.
Trigger: Specify the input type that triggers the event.
Video Motion Selecting this will trigger the event when motion is detected during
Detection: live video monitoring. Make sure you have enabled motion detection
and specified what part of the image to monitor for motion. For more
details, refer to Motion Detection on page 34.
Periodic: Selecting this will trigger the event in specified intervals. The trigger
interval unit is in minutes.
System Boot: Selecting this will trigger an event when the system boots up.
Network Lost: Selecting this will trigger an event when the camera's connection to
the network is lost.
Event Schedule: Specify when you want to monitor for this event. Select which days to
monitor for this event, then select Always or enter the time interval to
monitor for the specified event.
Action: If you have created Server and Media entries, you will see them appear
here. Select which Server you want to send to and which Media you
want the camera to send.
D-Link DCS-2670L User Manual

Add Event

41