D-Link DCS-2670L User Manual

D-Link DCS-2670L User Manual

Full hd 180-degree outdoor wi-fi cam
Hide thumbs Also See for DCS-2670L:

Advertisement

Version 1.00 | 6/1/2017

User Manual

Full HD 180-Degree Outdoor Wi-Fi Cam
DCS-2670L

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DCS-2670L

  • Page 1: User Manual

    Version 1.00 | 6/1/2017 User Manual Full HD 180-Degree Outdoor Wi-Fi Cam DCS-2670L...
  • Page 2: Manual Revisions

    Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change.
  • Page 3: Table Of Contents

    Live Video ..................19 Technical Specifications ..........56 Setup ....................21 Setup Wizard ................21 Regulatory Information ..........58 Network Setup ..............26 Wireless Setup ..............29 Dynamic DNS ...............30 Image Setup .................31 Audio and Video ..............33 Motion Detection ...............34 Sound Detection ..............35 D-Link DCS-2670L User Manual...
  • Page 4: Product Overview

    Section 1: Product Overview Product Overview Package Contents Waterproof Cable Connector DCS-2670L Full HD 180-Degree Outdoor Wi-Fi Cam Power Adapter Camera Base and Mounting Kit Quick Installation Guide Ethernet Cable If any of the above items are missing, please contact your reseller.
  • Page 5: System Requirements

    • Firefox 12 or higher mydlink Website Requirements • Safari 6 or higher • Chrome 20 or higher Note: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. D-Link DCS-2670L User Manual...
  • Page 6: Introduction

    Setup is easy via the in-app setup wizard, and you can receive instant notifications and view live streams from anywhere using your mobile device. mydlink Web Portal Using a standard web browser, you can manage the DCS-2670L via the mydlink website, so you can access your DCS-2670L anytime, anywhere in the world.
  • Page 7: Hardware Overview

    The IR-Cut sensor monitors lighting conditions and switches between color and Light Sensor infrared modes accordingly. 180° Camera Lens Provides a wide-angle view and streams/records video of your environment. Status LEDs Indicates the camera’s current status. Microphone Records audio from the camera's environment. D-Link DCS-2670L User Manual...
  • Page 8: Rear View

    Insert a microSD card to record videos and images to the card. Camera Base Rotate the camera base until you achieve your desired viewing angle. Baseplate Use the baseplate to easily mount the camera to the surface of your choice. D-Link DCS-2670L User Manual...
  • Page 9: Wireless Installation Considerations

    Wireless Installation Considerations The DCS-2670L connects to your network using a wireless connection from anywhere within the operating range of your wireless network. However, the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
  • Page 10: Installation

    Connect one end of the included power adapter to the back of the camera. Step 2: Plug the Power Adapter to a Wall Outlet Plug the other end of the power adapter to a wall outlet to power on your camera. D-Link DCS-2670L User Manual...
  • Page 11: Mobile App Setup

    Lite in the App Store or Google Play. Launch the mydlink Lite app and create a new account or sign in to your existing account. Follow the onscreen instructions to set up your camera. D-Link DCS-2670L User Manual...
  • Page 12 Select Wi-Fi Setting and “Enable Wi-Fi connection”. Step 3: Select your wireless network and enter your password, then tap Apply. Step 4: You can now disconnect the Ethernet cable and move the camera to your preferred location. D-Link DCS-2670L User Manual...
  • Page 13: Mydlink

    For more details on using your camera with mydlink, go to the Support section of the mydlink website and check the User Manual section for your product to find the latest guides for your camera’s mydlink features. D-Link DCS-2670L User Manual...
  • Page 14: Mounting The Camera

    Place the baseplate over the holes that are in the wall. Make sure to align the baseplate holes with the holes in the wall. Use the supplied screws to attach the baseplate to the surface of the wall. D-Link DCS-2670L User Manual...
  • Page 15 Once the camera is secured to the baseplate, use a screwdriver to fasten the screw next to the hole at the back of the camera body. Step 6: Adjust the angles via the camera body and rotate the silver base until you achieve your desired viewing angle. D-Link DCS-2670L User Manual...
  • Page 16: Waterproofing Your Camera

    Note: Due to its IP65 rating we recommend that you install your device under a roof or a shelter to protect the Power and Ethernet connections from water seepage. However, the cables and connections need to be located away from all potential water hazards. D-Link DCS-2670L User Manual...
  • Page 17 Note: Butyl rubber tape should be wrapped by stretching the tape to about twice its length, and wrapping it around the cable. Failure to stretch the tape sufficiently will result in insufficient waterproofing performance. D-Link DCS-2670L User Manual...
  • Page 18: Configuration

    The camera’s built-in Web configuration utility is designed to allow you to easily access and DCS-2670L configure your DCS-2670L. Once it is set up, enter the IP address of your camera into a web . To log in, use the User name admin and the password you browser, such as Internet Explorer ®...
  • Page 19: Live Video

    Please make sure that you have the latest version of Java installed on your computer to ensure proper operation when viewing the video in Java mode. The Java application can be downloaded free from Sun’s web site (http://www.java.com). D-Link DCS-2670L User Manual...
  • Page 20 Storage Folder Sets the storage folder for snapshots and video recordings. Sends the audio received from the camera’s microphone Speaker through to the PC’s speakers. Magnify Use this button to zoom in on the live view stream. D-Link DCS-2670L User Manual...
  • Page 21: Setup

    Motion Detection Setup Wizard on page 24 for more details. Manual Motion If you would rather manually set up the camera’s motion detection Detection Setup: features, you can refer to Motion Detection on page 34 which provides more details on the information required. D-Link DCS-2670L User Manual...
  • Page 22: Internet Connection Setup Wizard

    Section 3: Configuration Internet Connection Setup Wizard This wizard will guide you through a step-by-step process to configure your new D-Link Camera and connect the camera to the Internet. Click Next to continue. Select how the camera will connect to the Internet.
  • Page 23 If you have selected DHCP, you will see a summary of your settings, including the camera's IP address. Please write down all of this information as you will need it in order to access your camera. Click Apply to save your settings. D-Link DCS-2670L User Manual...
  • Page 24: Motion Detection Setup Wizard

    Step 2 This step allows you to enable motion detection based on a customized schedule. Specify the days and hours to enable motion detection. You may also choose to always record whenever motion is detected. D-Link DCS-2670L User Manual...
  • Page 25 Click Next to continue. Step 4 You have completed the Motion Detection Wizard. Please verify your settings and click Apply to save them. Please wait a few moments while the camera saves your settings and restarts. D-Link DCS-2670L User Manual...
  • Page 26: Network Setup

    Enter the primary domain name server that translates names to IP addresses. Secondary DNS: Enter the secondary domain name server used to back up the Primary DNS. Enable UPnP Enabling this setting allows your camera to be configured as a UPnP Presentation: device on your network. D-Link DCS-2670L User Manual...
  • Page 27 QoS, the router's settings will override the QoS settings of the camera. Enable IPv6: Select Enable IPv6 to automatically get an IPv6 address from your router. If you have a static or fixed IP from your network administrator, D-Link DCS-2670L User Manual...
  • Page 28 Static IP address and enter the information provided by your ISP or network administrator. Enable Multicast for The DCS-2670L allows you to multicast each of the available streams stream: via a group address and lets you specify the TTL value for each stream.
  • Page 29: Wireless Setup

    Select the same encryption method that is being used by your wireless device/router. Encryption: Select Shared, WPA-PSK, or WPA2-PSK as Open is not recommended for security purposes. Key: Enter the key(password) for your wireless network. Click the Save Settings button to save your changes. D-Link DCS-2670L User Manual...
  • Page 30: Dynamic Dns

    Enter the password used to connect to your DDNS account. Enter it again in the Verify Password field. Timeout: Enter the DNS timeout values you wish to use. Status: This indicates the connection status, which is automatically determined by the system. D-Link DCS-2670L User Manual...
  • Page 31: Image Setup

    You can also create 3 different custom exposure modes that let you set the minimum and maximum shutter speeds. The Max Gain setting will allow you to control the maximum amount of gain to apply to brighten the picture. D-Link DCS-2670L User Manual...
  • Page 32 You can select the strength of Wide Dynamic Range from this drop-down menu to enhance dark and bright areas of your image. Reset Default: Click this button to reset the image settings to the factory defaults. D-Link DCS-2670L User Manual...
  • Page 33: Audio And Video

    Audio In Off: Checking this will mute the audio picked up by the built-in microphone. Audio In Gain Level: Specify how much gain to add to the audio picked up by the built-in microphone. D-Link DCS-2670L User Manual...
  • Page 34: Motion Detection

    Right click on the camera image to bring up the following menu options: Select All: Draws a motion detection area over the entire screen. Clear All: Clears any motion detection areas that have been drawn. Restore: Restores the previously specified motion detection areas. D-Link DCS-2670L User Manual...
  • Page 35: Sound Detection

    Select this box to enable the sound detection feature of your camera. Detection Level: Specify the volume level that a sound must exceed in order to trigger the sound detection feature. The lower the number, the more sensitive the camera will be to sound. D-Link DCS-2670L User Manual...
  • Page 36: Time And Date

    NTP Server: Protocol (NTP) server. NTP Server: Network Time Protocol (NTP) synchronizes the DCS-2670L with an Internet time server. Choose the one that is closest to your location. Set Date and Time This option allows you to set the time and date manually.
  • Page 37: Event Setup

    Event Setup The DCS-2670L has a comprehensive Event system that lets you configure the camera to perform certain actions when an event occurs. For example, when motion is detected, you can have snapshots sent to an e-mail address. You can also configure the camera to take regular video recordings according to a schedule you define.
  • Page 38: Add Server

    After you've filled these fields out, click the Test button to make sure the system is working correctly. SD Card: Select this to use an inserted microSD card as your server. D-Link DCS-2670L User Manual...
  • Page 39: Add Media

    9 images are generated after a trigger is activated. 1 pic. 2 pic. 3 pic. 4 pic. 5 pic. 6 pic. 7 pic. 8 pic. 9 pic. The moment the trigger is activated. D-Link DCS-2670L User Manual...
  • Page 40 This is the prefix that will be added to the filename of saved video clips. System log: Select this option to set the media type to system logs. This will send the system log, but will not record any snapshots or video. D-Link DCS-2670L User Manual...
  • Page 41: Add Event

    Action: If you have created Server and Media entries, you will see them appear here. Select which Server you want to send to and which Media you want the camera to send. D-Link DCS-2670L User Manual...
  • Page 42: Add Recording

    Before you set up this option, please make sure your storage drive has enough free space. Also, it is recommended that you do not save other files in the same folder as your recording files. D-Link DCS-2670L User Manual...
  • Page 43 Time of each file for If this is selected, files will be separated based on the maximum length recording: you specify. File Name Prefix: The prefix name will be added to the file name of the recording file(s). D-Link DCS-2670L User Manual...
  • Page 44: Sd Card

    Click this icon to automatically format the microSD card and create the Video and Picture folders. Deleting Files and To delete files and folders, click on the checkbox next to the files or folders you want to delete, then click the OK button. Folders: D-Link DCS-2670L User Manual...
  • Page 45: Advanced

    The IR light will always be on. Sync with ICR: The IR light will turn on when the ICR filter is disabled (night mode). Schedule: The IR light will turn on or off according to the schedule that you specify below. D-Link DCS-2670L User Manual...
  • Page 46: Https

    • Create a certificate request and install Status: Displays the details of the SSL certificate that is being used. Note: The certificate cannot be removed while HTTPS is still enabled. To remove the certificate, you must first uncheck Enable HTTPS secure connection. D-Link DCS-2670L User Manual...
  • Page 47: Access List

    Section 3: Configuration Access List Here you can set access permissions for users to view your DCS-2670L. Allow list: The list of IP addresses that have access rights to the camera. Note: When adding entries to the Allow list, make sure the first entry includes the IP address of the computer or device you are using to access the camera.
  • Page 48: Maintenance

    Label: Enter a label for the camera, which will be shown on the OSD when it is enabled. LED: You may specify whether or not to illuminate the status LED on the camera. D-Link DCS-2670L User Manual...
  • Page 49: System

    This will restart your camera. Enable Schedule If you want your camera to reboot on a regular schedule, check the Reboot: Enable Schedule Reboot checkbox, then select the days and time you want the camera to reboot. D-Link DCS-2670L User Manual...
  • Page 50: Firmware Upgrade

    Section 3: Configuration Firmware Upgrade The camera's current firmware version will be displayed on this screen. You may visit the D-Link Support Website to check for the latest available firmware version. To upgrade the firmware on your DCS-2670L, please download and save the latest firmware version from the D-Link Support Page to your local hard drive.
  • Page 51: Status

    Section 3: Configuration Status Device Info This page displays detailed information about your device and network connection. D-Link DCS-2670L User Manual...
  • Page 52: Log

    Section 3: Configuration This page displays the log information of your camera. You may download the information by clicking Download. You may also click Clear to delete the saved log information. D-Link DCS-2670L User Manual...
  • Page 53: Help

    Section 3: Configuration Help This page provides helpful information regarding camera operation. D-Link DCS-2670L User Manual...
  • Page 54: Troubleshooting

    It could be that the image sensor has become overloaded when it has been exposed to bright light such as direct exposure to sunlight or halogen lights. Reposition the camera into a more shaded area immediately, as prolonged exposure to bright lights will damage the sensor. D-Link DCS-2670L User Manual...
  • Page 55 Also, check that you have the latest version of Java installed. Java can be downloaded from http://www.java.com If you are using Internet Explorer with a version number 6 or lower, then you will need to upgrade your Web browser software in order to view the streaming video transmitted by the Network Camera. D-Link DCS-2670L User Manual...
  • Page 56: Technical Specifications

    • uPnP port forwarding • DNS client • ONVIF • DDNS client (D-Link) • RTP/RTSP/RTCP • SMTP client • Bonjour Security Features • Administrator and user group protection • HTTP and RTSP digest encryption • Password authentication D-Link DCS-2670L User Manual...
  • Page 57 • Storage: -20 to 70 °C (-4 to 158 °F) Humidity • Operating: 20% to 80% non-condensing • Storage: 5% to 95% non-condensing Certifications • CE • ICES • CE LVD • RCM • FCC Dimensions Diagram 0 75.7 mm 102.1 mm D-Link DCS-2670L User Manual...
  • Page 58: Regulatory Information

    Note: The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in the USA must be fixed to USA operational channels only. D-Link DCS-2670L User Manual...
  • Page 59 Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. D-Link DCS-2670L User Manual...

Table of Contents