D-Link DCS-2210 Quick Install Manual

Full hd poe/wireless n cube network camera
Hide thumbs Also See for DCS-2210:

Advertisement

Quick Links

Quick Install Guide
Full HD PoE/Wireless N Cube Network Camera
This document will guide you through the basic installation
process for your new D-Link Network Camera.
DCS-2210/DCS-2230
Documentation also available
on CD and via the D-Link
Website

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DCS-2210

  • Page 1 Quick Install Guide Full HD PoE/Wireless N Cube Network Camera This document will guide you through the basic installation process for your new D-Link Network Camera. DCS-2210/DCS-2230 Documentation also available on CD and via the D-Link Website...
  • Page 2: Installation Steps

    DCS-2210/DCS-2230 Quick Install Guide This installation guide provides basic instructions for installing the DCS-2210/DCS-2230 Network Camera on your network. For additional information about how to use the camera, please see the User’s Manual which is available on the CD include in this package or from the D-Link support website.
  • Page 3: Hardware Overview

    Records audio from the accordingly surrounding area WPS LED (DCS-2230 only) Infrared LED WPS status indicator Used to illuminate the camera's field of view at night Speaker Audio output Passive Infrared sensor for motion detect D-Link DCS-2210/DCS-2230 Quick Install Guide...
  • Page 4: Left Panel

    Left Panel Micro SD Card slot Local storage for storing recorded image and video D-Link DCS-2210/DCS-2230 Quick Install Guide...
  • Page 5: Hardware Installation

    Connect the camera to your switch or router via Ethernet cable. Connect the supplied power cable from the camera to a power outlet. Connection Using a PoE Switch (DCS-2210 only) If using a PoE switch or router, connect the network camera via Ethernet cable.
  • Page 6: Configuration With Wizard

    Insert the DCS-2210/DCS-2230 CD into your computer's CD-ROM drive to begin the installation. If the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive letter of your CD-ROM drive.
  • Page 7 Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE The Setup Wizard will appear and display the MAC address and IP address of your camera(s). If you have a DHCP server on your network, a valid IP Address will be displayed.
  • Page 8: Viewing Camera Via Web Browser

    Viewing Camera via Web Browser Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE Select the camera and click the button labeled "Link" to access the web configuration.
  • Page 9 Notes D-Link DCS-2210/DCS-2230 Quick Install Guide...
  • Page 10 Notes D-Link DCS-2210/DCS-2230 Quick Install Guide...
  • Page 11 Notes D-Link DCS-2210/DCS-2230 Quick Install Guide...
  • Page 12: Technical Support

    Copyright ©2011 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate.

This manual is also suitable for:

Dcs-2230

Table of Contents