Electrolux WTSL 6 E201 User Manual page 16

16 www.electrolux.com
Digit area
Time of the day
When you activate the appliance the display shows the time of the day for
some seconds. To adjust the clock, refer to "Clock setting".
Programme duration
When you set the programme, the cycle duration is displayed for a few sec‐
onds then, the time of the programme end appears again.
D
End time of the programme
Time of delay
When you set the delayed start the time of the programme end increases by
steps of 30 minutes till 10 hours and by steps of one hour till 20 hours.
End of the programme
The display shows a zero.
This part comes on only if the door is open - Refer to 'Activating the appliance
and setting a programme'.
E
Graphic bars
To set a function:
The function indicator comes on when the related function is set.
If you make a wrong selection, the text bar says that the selection is not
possible.
Programme duration indicator
The indicator comes on when the digits shows the programme
duration.
Programme end indicator
The indicator comes on when the digits shows the programme
end time.
Maximum allowed load of laundry for the set programme (in kg).
The empty indicator bar appears only if the related function is
available for the set programme.
If an indicator bar does not come on, it means that it is not avail‐
able.
The indicator bar fills accordingly to the set functions.