Table of Contents
Advertisement
40
www.electrolux.com
15.8 Cleaning the inlet hose filter and the valve filter
It could be necessary to clean the filters when:
•
The appliance does not fill with water.
•
The appliance fills with the water for a long time.
•
The indicator of button Start/Pause - Départ/Pause flashes and the display shows the
related alarm. Refer to 'Troubleshooting'.
To clean the water inlet filters:
1
2
20°
3
45°
•
Close the water tap.
•
Remove the water inlet hose from the
water tap.
•
Clean the filter in the inlet hose with a stiff
brush.
•
Remove the inlet hose behind the
appliance.
•
Clean the filter in the valve with a stiff
brush or a towel.
•
Install again the inlet hose. Make sure that
the couplings are tight to prevent
leakages.
•
Open the water tap.
Advertisement
Table of Contents
