Electrolux WTSL 6 E201 User Manual page 43

Problem
The appliance does not
drain the water.
The appliance fills with wa‐
ter and drains immediate‐
ly.
The spin phase does not
operate or the washing cy‐
cle lasts longer than usual‐
ly.
There is water on the floor. Make sure that the couplings of the water hoses are
You cannot open the appli‐
ance door.
Possible solution
Make sure that there is not a damaged fuse in the
fuse box.
Make sure that the you have touched Start/Pause -
Départ/Pause.
If the delay start is set, cancel the setting or wait for
the end of countdown.
Deactivate the Child Lock function if it is on.
Make sure that you have not set a programme without
drain phase.
Make sure that you have not set an option which ends
with water in the tub.
Make sure that the drain hose is in the correct posi‐
tion. The hose may be too low.
Make sure that the spin phase is not off.
Make sure that the drain filter is not clogged. Clean
the filter, if necessary. Refer to 'Care and cleaning'.
Make sure that the this is not a balance problem. Ad‐
just manually the items in the drum and start the spin
phase again.
tight and there is not water leakages.
Make sure that the drain hose have no damages.
Make sure you use the correct detergent and the cor‐
rect quantity of it.
Make sure you use that the room temperature is in the
correct range.
Make sure you use that there is enough air circulation
under the appliance.
Make sure that the washing programme is finished.
Set the drain or the spin programme if there is water
in the drum.
Make sure that the appliance receives electrical pow‐
er.
ENGLISH 43