Table of Contents
Advertisement
2. If the correcl free play cannot be
obtained using the cable adjuster (3),
loosen the lock nut (2) and tum the
cable adjuster in all the way. Tighten
the lock nut.
3. At the lower end of the cable, loosen
lhe lock nul (4), and lum lhe cable
adjusler (5) 10 give aboul 16 mm (5/8
in)
free play at the clutch lever and
tighten the lock nut.
•
4, Make the final free play adjustment at
the clut,ch hand lever.
81
(5) Clutch cable adjuster
5. Start the engine, pull in the clutch
lever and shift into gear. Make sure
that the engine does not stall and the
motorcycle does not creep. Gradually
relea~
the clutch lever and open the
throttle. The motorcycle should start
smoothly and accelerate gradually.
NOTE:
•
If proper adjustment cannot be obtain-
ed or the clutch does not work cor-
rectly,
see
your authorized
Honda
dealer.
Other Checks:
Check the clutch cable for kinks or signs
of wear that could cause sticking or failure.
Lubricate the clutch cable with a com-
mercially
available
cable
lubricant
to
prevent premature wear and corrosion.
(3) Clutch cable adjuster
(2) lQck nut
(1)
Clutch lever
80
Clutch adjustment may be required if the
motorcycle stalls when shifting into gear
or
t~nds
to creep; or
if
the clutch slips,
causlOg acceleration to lag behind engine
speed.
.
Normal clutch lever free play is 10-20 mm
(3/8-3/4
in)
allhe lever.
1. Loosen the lock nut (2) and tum the
clutch cable adjuster (3). Tighten the
lock nut (2), and check adjustment.
CLUTCH
Hide quick links:
Advertisement
Table of Contents
