Radio-Transmitter Cloning; Advanced Programming: Collective Receivers; Accessories; Scrapping - BFT ALCOR N Installation And User Manual

Hide thumbs Also See for ALCOR N:
Table of Contents

Advertisement

12) RADIO-TRANSMITTER CLONING (Fig.7)
Rolling-code cloning / Fixed-code cloning
Make reference to the
universal palmtop programmer
CLONIX Programming Guide.

12.1) ADVANCED PROGRAMMING: COLLECTIVE RECEIVERS

Make reference to the
universal palmtop programmer
CLONIX Programming Guide.

13) ACCESSORIES

SPL (fig.4). Pre-heating optional board. Recommended for temperatures
below -10°C. (In the case of hydraulic motors).
ME (fig.5).
Optional board used to connect a 12V~ electric lock.
SS (Fig.6/6A) Optional board for gate-open warning light.
WARNING: only works if electrical limit switches are used.
With the limit switches connected (configuration DSW 9 OFF) use the
diagram in figure 6.
With the OPEN - CLOSE/PEDESTRIAN buttons (configuration DSW 9
ON) use the diagram in figure 6A.
EBP (fig.2). The EBP electric lock with continuous service can be connected
directly to terminals 1 and 4.

14) SCRAPPING

Warning: This operation should only be carried out by qualified person-
nel. Materials must be disposed of in conformity with the current regulations.
In case of scrapping, the automation devices do not entail any particular risks
or danger. In case of materials to be recycled, these should be sorted out by
type (electrical components, copper, aluminium, plastic etc.).
15) DISMANTLING
Warning: this operation should only be carried out by qualified person-
nel. When the control unit is disassembled to be reassembled on another
site, proceed as follows:
Disconnect the power supply and the entire electrical installation.
In the case where some of the components cannot be removed or are
damaged, they must be replaced.
The descriptions and illustrations contained in the present manual are
not binding. The Company reserves the right to make any alterations
deemed appropriate for the technical, manufacturing and commercial
improvement of the product, while leaving the essential product fea-
tures unchanged, at any time and without undertaking to update the
present publication.
INSTALLATION MANUAL
Instructions and the
Instructions and the
ENGLISH
11
ALCOR N-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents