Table of Contents
Advertisement
Using the self-cleaning oven.
Never force the latch handle. Forcing the handle will damage the door lock mechanism.
26
How to Delay the Start of Cleaning
Latch the door.
Press the SELF CLEAN pad.
Using the number pads, enter the
desired clean time.
Press the DELAY START pad. The
earliest start time you can set will
appear in the display.
Using the number pads, enter the
time of day you want the clean cycle
to start.
Press the START pad.
After a Clean Cycle
You may notice some white ash in the
oven. Wipe it up with a damp cloth after
the oven cools.
If white spots remain, remove them with a
soap-filled steel wool pad and rinse
thoroughly with a vinegar and water
mixture.
These deposits are usually a salt residue
that cannot be removed by the clean
cycle.
If the oven is not clean after one clean
cycle, repeat the cycle.
The self-clean cycle will automatically
begin after CLEAN is displayed and the
time for the clean cycle is reached. The
words ON and LOCKED DOOR will appear
in the display. It will not be possible to
open the oven door until the
temperature drops below the lock
temperature and the LOCKED DOOR
light goes off.
When the LOCKED DOOR light is off, slide
the latch handle to the left as far as it will
go and open the door.
You cannot set the oven for cooking
until the oven is cool enough for the
door to be unlatched.
While the oven is self-cleaning, you
can press the CLOCK pad to display
the time of day. To return to the
clean countdown, press the COOKING
TIME pad.
If the shelves become hard to slide,
apply a small amount of vegetable oil
or cooking oil to a paper towel and
wipe the edges of the oven shelves
with the paper towel.
Advertisement
Table of Contents
