Jb970 - GE JB970 series Owner's Manual And Installation Instructions

If the probe is removed from the food before the final temperature is reached, a tone will sound and the display will
flash until the probe is removed from the oven.
You can use the timer even though you cannot use timed oven operations.
How to Set the Oven For Roasting When Using the Probe
Insert the probe into the food.
Plug the probe into the outlet in the
oven. Make sure it's pushed all the
way in. Close the oven door.
Press the PROBE pad.
Press the number pads to set the
desired internal food or meat
temperature.
Press the BAKE pad.
Press the number pads to set the
desired oven temperature.
Press the START pad.
The display will flash if the probe is inserted into
the outlet and you have not set a probe
temperature and pressed the START pad.
When the oven starts to heat, the word
LO will be in the display.
After the internal temperature of the
food reaches 100°F., the changing
internal temperature will be shown in
the display.
When the internal temperature of
the food reaches the number you
have set, the probe and the oven
turn off and the oven control signals.
To stop the signal, press the
CLEAR/OFF pad. Use hot pads to
remove the probe from the food.
Do not use tongs to pull on it—they
might damage it.
To change the oven temperature during
the Roast cycle, press the BAKE pad and
then the number pads to set the new
temperature.
19