Verifying Controller Association - Cisco AIR-AP1572IC Hardware Installation Manual

Chapter 3 Troubleshooting
LED Message
Type
Association
status
Operating
Status
Alignment
Mode

Verifying Controller Association

To verify that your access point is associated to the controller, follow these steps:
Log into your controller web interface using a web browser.
Step 1
You can also use the controller CLI show ap summary command from the controller console port.
Step 2 Click Wireless, and verify that your access point MAC address is listed under Ethernet MAC.
Step 3 Log out of the controller, and close your web browser.
OL-32138-01
Color
Chirping (short blips)
Green
Solid Green
Blinking Amber
Cycling through Green,
Red and Amber
Rapidly cycling through
Red, Green, Amber and
Off
Blinking Red
Color
Solid Green
Fast blinking Green
Medium blinking Green
Solid Amber
Fast blinking Amber
Medium blinking Amber
Slow blinking Amber
Slow blinking Red
Medium blinking Red
Fast blinking Red
Solid Red
Off
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
Meaning
This status indicates a normal operating condition. The
unit is joined to a controller, but no wireless client is
associated with it.
Normal operating condition with at least one wireless
client associated with the unit
A software upgrade is in progress
Discovery/join process is in progress
This status indicates that the Access Point location
command has been invoked.
This status indicates that an Ethernet link is not
operational
Signal Level (dBm)
> –44
–47 to –44
–50 to –47
–53 to –50
–57 to –53
–60 to –57
–63 to –60
–66 to –63
–69 to –66
–72 to –69
–75 to –72
< –75

Verifying Controller Association

3-5