1. Manuals
  2. Brands
  3. Logosol Manuals
  4. Saw
  5. BS350
  6. User manual

Logosol bs350 User Manual

Electric band saw
Hide thumbs Also See for bs350:
Table of Contents

Advertisement

Quick Links

Download this manual

uSer manuaL

TRANSLATION OF ORIgINAL uSeR mANuAL.
ARTIcLe NO: 0458-395-0236
Read through the user manual carefully and make sure you understand its contents
before you use the machine.
This user manual contains important safety instructions.
Warning! Incorrect use can result in serious or fatal injuries to the operator or others.
LOGOSOL BS350
LOGOSOL BS350

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the bs350 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Logosol bs350

Summary of Contents for Logosol bs350

  • Page 1: User Manual

    LOGOSOL BS350 uSer manuaL TRANSLATION OF ORIgINAL uSeR mANuAL. ARTIcLe NO: 0458-395-0236 LOGOSOL BS350 Read through the user manual carefully and make sure you understand its contents before you use the machine. This user manual contains important safety instructions. Warning! Incorrect use can result in serious or fatal injuries to the operator or others.

  • Page 2: Circuit Diagram

    You have now bought the BS350, an efficient bandsaw adapted for the Logosol Sawmill. If you have any questions about your BS350, do not hesitate about contacting us at LOGOSOL. Our aim is to make you yet another satisfied owner of one of our products.

  • Page 3: Safety Instructions

    ...the Logosol Sawmill is securely fastened to the ground. The Bandsaw may only be used in good visibility ... the BS350 is properly mounted on the sawmill's conditions. guide rail..no tools are inside the plastic safety cover.

  • Page 4: Machine Description

    Installation Machine Description BS350 is constructed for mounting on the Logosol The Logosol Sawmill must be fixed to the ground sawmill. The frame is made from cast aluminium in according to its manual. In addition, support legs order to minimize the weight. Aluminium also has are to be fitted to each end of the guide rail.

  • Page 5: Before Each Work Shift

    Make sure the equipment is in good condition. bend it with force. There is risk of being injured by Also check the electric cable and the Logosol the sharp teeth, and the saw blade can get ridges Sawmill.

  • Page 6: Adjusting The Blade Guides

    Maintenance of Saw Blades the blade is about to break. Immediately interrupt sawing if you hear that the blade is starting to Sawing is almost always trouble-free with a new break. A saw blade that breaks can damage the saw blade. After some time of sawing with the equipment.

  • Page 7: Cooling The Saw Blade

    If water is still not supplied, it can be due to a defective solenoid valve. Contact Logosol. To prevent the solenoid valve and the balancing valve from freezing, empty the water system if there is risk of the bandsaw getting exposed to temperatures below 0°C.
  • Page 8 Sawmill is adapted for using a chainsaw. A chainsaw too large for the BS350. A bandsaw blade is very has only a small part of its weight outside the guide sensitive to dirt on the logs, while a saw chain is...

  • Page 9: Make Sure That

    8. you never reverse the saw while the saw blade is running. 9. you call Logosol if you have any problems, or just to tell us that the saw works well. If some form of operational disturbance occurs, immediately stop sawing and turn the machine off before solving the problem.
  • Page 10 Lethal voltage! Risk of electric shock. Do not open the the electrical system if you are not a qualified electrician. Electrical installations may only be carried out by a qualified electrician. The circuit diagrams that are placed inside the electric box of the bandsaw are the ones that are relevant.

  • Page 11: Technical Data

    6600-000-3001 Wire kit 10 m (33 ft) 6605-000-0300 Declaration of Conformity The manufacturer, Logosol AB, Industrigatan 13, S-871 53 Härnösand, tel. +46 611 18285, Härnösand 2008-02-27 hereby declares that BS 350, ref. no. 9999-000-7500, is manufactured in accordance with: Machinery Directive 98/37/EG, EMC-directive 2004/108/EG and LVD-directive 2006/95/ Bengt-Olov Byström, MD...
  • Page 12 LogosoL sWeden Fiskaregatan 2, Se-871 33 Härnösand, Sweden Phone +46 (0)611-182 85 | Fax +46 (0)611-182 89 info@logosol.com | www.logosol.com...

Table of Contents