Daily Cleaning After A Wet Shave - ALDI visage User Manual

Cleaning and maintenance
4. Depress both release buttons
2
(see Fig. D).
head
5. Pull the shaver head up and off.
6. Knock the shaver head out gently over a sink to remove
stubbles.
7. Without the shaver head mounted, use the On/Off switch to
switch the shaver on for approx. 5–10 seconds to dispel any
stubble from the shaver blades
8. Firmly mount the shaver head on the shaver until the lock-
ing mechanism audibly engages (see Fig. E).
9. Place the protective cap
The shaver is now ready for use again.

Daily cleaning after a wet shave

1. Use the On/Off switch
2. Before cleaning, pull the 5 V plug
3. Hold the shaver over the sink.
4. Depress both release buttons
2
(see Fig. D).
head
5. Pull the shaver head up and off.
6. Wash the shaver head thoroughly under warm running
water on the inside and outside (see Fig. F).
7. Carefully dry the shaver head with a lint-free cloth or a pa-
per towel. In the process, do not push the shaving foils in.
8. Thoroughly rinse off the top part of the shaver and the
shaver blades under warm running water (see Fig. G).
9. Use the On/Off switch
the shaver head for approx. 5–10 seconds to dispel any
drops of water off of the shaver blades
22
4
to release the shaver
3
.
1
on the shaver.
5
to turn off the shaver.
8
4
to release the shaver
5
to switch the shaver on without
out of the shaver.
3
.