Weekly Cleaning - ALDI visage User Manual

10. Use a lint-free cloth or a paper towel to thoroughly dry off
the shaver.
11. Firmly mount the shaver head on the shaver until the lock-
ing mechanism audibly engages (see Fig. E).
12. Place the protective cap
The shaver is now ready for use again.

Weekly cleaning

It is recommended that you thoroughly clean the shaver once
a week. To do so, proceed as follows:
1. Use the On/Off switch
2. Before cleaning, pull the 5 V plug
3. Hold the shaver over the sink.
4. Depress both release buttons
2
(see Fig. D).
head
5. Pull the shaver head up and off.
6. Knock the shaver head out gently over a sink to remove
stubbles.
7. Thoroughly wash the shaver head under warm running
water from the inside and outside (see Fig. F).
8. Carefully dry the shaver head with a lint-free cloth or a
paper towel. In the process, do not push the shaving foils in.
9. Without the shaver head mounted, use the On/Off switch
to switch the shaver on for approx. 5–10 seconds to dispel any
stubble from the shaver blades
10. Switch the shaver back off.
11. Use the cleaning brush
stubbles from the shaver blades and the entire top part of
the shaver (see Fig. H).
Cleaning and maintenance
1
on the shaver.
5
to turn off the shaver.
8
4
to release the shaver
3
.
7
to completely remove all
out of the shaver.
5
23