Daily Cleaning After A Wet Shave - ALDI easy home User Manual

Daily cleaning after a wet shave

1. Before cleaning, pull the 5 V plug
shaver (see fig. A and B).
2. Use the On/Off switch
3. Hold the shaver over the sink.
4. Depress both release buttons
shaver head
5. Pull the shaver head
6. Wash the shaver head thoroughly under warm run-
ning water on the inside and outside (see fig. G).
7. Carefully dry the shaver head with a lint-free cloth or
a paper towel. In the process, do not push the shav-
ing foils in.
8. Thoroughly rinse off the top part of the shaver and
the shaver blades under warm running water (see
fig. H).
9. Use the On/Off switch
without the shaver head for approx. 5 – 10 seconds
to dispel any drops of water off of the shaver blades
4
.
10. Use a lint-free cloth or a paper towel to thoroughly
dry off the shaver.
11. Firmly mount the shaver head on the shaver until the
locking mechanism audibly engages (see fig. F).
12. Place the protective cap
The shaver is now ready for use again.
AFTER SALES SUPPORT
Cleaning and maintenance
5
to turn off the shaver.
2
(see fig. E).
2
up and off (see fig. A).
5
to switch the shaver on
1
877 368 8246
USA
8
out of the
4
to release the
on the shaver.
TM3Service@outlook.com
USA
25