Handling; Dry Shave - ALDI visage User Manual

Handling

2. Connect the AC adapter plug
outlet.
The grid symbol
indicate that the battery is charging. In addition, the battery
11
symbol
battery has been fully charged.
3. To charge the shaver, place it on a dry and level surface or
shave in grid mode.
Handling

Dry shave

We recommend a dry shave before you wash.
After washing, you skin is slightly swollen. As
a result, shavers are often unable to reach the
entire length of your beard hair so the shave will
be less thorough.
For a dry shave, follow the steps below:
1. Take the protective cap
2. Use the On/Off switch
3. Use your free hand to stretch the part of your face you in-
tend to shave.
4. While applying gentle pressure, move the shaver head
perpendicular to the direction of hair growth.
5. After a few strokes, use your free hand to check the results
and repeat step 4 if necessary.
6. Shave as described in steps 3–4.
7. If necessary, use the trimmer
ter "Using the trimmer" (see Fig. C).
8. Switch the shaver off once you have finished shaving.
18
12
on the handle illuminates in red to
flashes in green as soon as the rechargeable
1
5
9
with a properly installed
off of the shaver.
to turn the shaver on.
13
as described in the chap-
2