User Maintenance For The Shaving Foils; Replacing Wearable Parts - ALDI visage User Manual

Cleaning and maintenance
12. Thoroughly rinse off the top part of the shaver and the
shaver blades under warm running water (see Fig. G).
13. Use the On/Off switch
the shaver head for approx. 5–10 seconds to dispel any
drops of water off of the shaver blades
14. Use a lint-free cloth or a paper towel to thoroughly dry off
the shaver.
15. Firmly mount the shaver head on the shaver until the lock-
ing mechanism audibly engages (see Fig. E).
16. Place the protective cap
The shaver is now ready for use again.

User maintenance for the shaving foils

To maintain the performance of your shaver and increase the
service life of the shaving foils, you should perform user main-
tenance on the shaving foils every two months as follows:
1. Put a drop of fine, non-resinous household oil on the tip of
your finger.
2. Distribute the oil evenly on the shaving foils of the shaver
2
head .
3. Without applying pressure, dab the shaving foils with a soft,
lint-free cloth or paper towel.

Replacing wearable parts

Replacing the shaving foil unit
If the shaving foil unit is damaged, it must be promptly
replaced. We generally recommend that you replace the
shaving foil unit after 12 months of daily use.
1. Depress both release buttons
2
(see Fig. D).
head
24
5
to switch the shaver on without
1
on the shaver.
4
to release the shaver
3
.