ALDI visage User Manual page 25

2. Pull the shaver head up and off.
3. Push the hooks
16
unit into the shaver head frame
4. Pull the shaving foil unit down and out of the shaver head
frame (see Fig. K).
5. Dispose of the used shaving foil unit as described in the
chapter "Disposal".
6. Place the new shaving foil unit in the shaver head frame so
that:
a. the guide braces inside the shaver head frame extend
into the guide grooves outside along the shaving foil unit
and
b. the recess in the shaving foil unit is on the same side as
the recess inside the shaver head frame.
7. Place two fingers on the back side of the integrated
trimmer.
8. Push the shaving foil unit into the shaver head frame until
the hooks audibly lock into the shaver head frame.
9. Firmly mount the shaver head on the shaver until the lock-
ing mechanism audibly engages (see Fig. E).
10. Place the protective cap
Your shaver is now ready for use again.
14
on the left and right of the shaving foil
1
on the shaver.
Cleaning and maintenance
15
(see Fig. J and K).
25