Daily Cleaning After A Wet Shave - ALDI ViSage User Manual

GB IRE
Cleaning and maintenance
8. Firmly mount the shaver head on the shaver until the
locking mechanism audibly engages (see fig. E).
9. Place the protective cap
The shaver is now ready for use again.

Daily cleaning after a wet shave

1. Use the On/Off switch
2. Before cleaning, pull the 5 V plug
shaver.
3. Hold the shaver over the sink.
4. Depress both release buttons
shaver head
5. Pull the shaver head up and off.
6. Wash the shaver head thoroughly under warm
running water on the inside and outside (see fig. F).
7. Carefully dry the shaver head with a lint-free cloth
or a paper towel. In the process, do not push the
shaving foils in.
8. Thoroughly rinse off the top part of the shaver and
the shaver blades under warm running water
(see fig. G).
9. Use the On/Off switch
without the shaver head for approx. 5–10 seconds to
dispel any drops of water off of the shaver blades
10. Use a lint-free cloth or a paper towel to thoroughly
dry off the shaver.
22
www.aquarius-service.com
1
5
to turn off the shaver.
2 (see fig. D).
5
to switch the shaver on
GB
IRE
on the shaver.
8
out of the
4
to release the
AFTER SALES SUPPORT
00800 - 36 46 36 00
3
.