Usb Configuration - Contec PT-S959SDHX User Manual

◆USB Configuration

Configure the USB settings.
USB Configuration
USB Module Version
USB Devices:
1 Keyboard, 1 Mouse, 1 Hub
Legacy USB Support
XHCI Hand-off
EHCI Hand-off
USB Mass Storege Driver Support
USB hardware delays and time-outs:
Device power-up delay
USB Overcurrent
USB 3.0 (XHCI) Support
USB2 Link Power Management
USB 2.0 (EHCI) Support
Figure 5.16. USB Configuration
Table 5.22. USB Configuration <1/2>
Item
Legacy USB Support
XHCI Hand-off
EHCI Hand-off
USB Mass Storage Driver Support
Device power-up delay
USB Overcurrent
USB3.0 (XHCI) Support
USB2.0 Link Power Management
54
Aptio Setup Utility - Copyright (C) 20xx American Megatrends, Inc.
Chipset
10
[Enable]
[Enable]
[Disabled]
[Enable]
[Auto]
[Disabled]
[Enabled]
[Disabled]
[Disabled]
Version x.xx.xxxx. Copyright (C) 20xx American Megatrends, Inc.
Option
Enabled
Disabled
Auto
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Auto
Manual
Enabled
Disabled
Enabled
Disabled
Smart Auto
Enabled
Disabled
PT-S959SDHX / PT-S959SDHXC Series User's Manual
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Description
Configure whether USB keyboards and
similar devices will be usable with legacy
operating systems (such as MS-DOS).
Do not change this setting.
Do not change this setting.
Configure the USB storage support settings
with BIOS.
Do not change this setting.
Do not change this setting.
Configure the USB 3.0 settings.
This should normally be set to Enabled.
Set to Smart Auto to set up a USB 3.0 driver
in Windows 7.
Do not change this setting.