Webb WERR17P Operator's Manual & Parts List page 7

e carton. Assemble as follows: the carton. Assemble as follows:
semble the upper mble the upper
e to the lower o the lower
with two cap x with two cap
nuts. s.
e using the two sing the two
olts and nuts, bolts and nuts,
ng that the large that the large
goes against the r goes against the
andle on the handle on the
INSTRUCTION MANUAL
of the handle e of the handle
e photo. the photo.
semble the upper mble the upper
on clamp bolts sion clamp bolts
e to the lower o the lower
e the handles ure the handles
e using the two sing the two
fig. 1
olts and nuts, bolts and nuts,
ng that the large that the large
er goes against the goes against the
andle on the handle on the
of the handle e of the handle
he photo. the photo.
he Self Propelled Self Propelled
able, again le, again
on clamp bolts sion clamp bolts
e the lever from e the handles he lever from ure the handles
unting by gen- ing by gen-
g it from the ng it from the
, attach the Z ttach the Z
end to the Self d to the Self
d drive lever as ed drive lever as
fig. 4
er to the handle. to the handle.
he Self Propelled Self Propelled
e cable router the cable router
able, again le, again
andle using the handle using the
e the lever from he lever from
ng bolt supplied, bolt supplied,
unting by gen- ing by gen-
g it from the ng it from the
side of the handle e of the handle
, attach the Z ttach the Z
he photo. the photo.
end to the Self d to the Self
d drive lever as ed drive lever as
er to the handle. to the handle.
e grass bag the grass bag
e cable router the cable router
ass bag frame s bag frame
andle using the handle using the
er then lock the hen lock the
ng bolt supplied, bolt supplied, fig. 7
buckles on the ckles on the
g frame. ag frame.
side of the handle e of the handle
he photo. the photo.
e grass bag the grass bag
ass bag frame s bag frame
er then lock the hen lock the
buckles on the ckles on the
bag frame. g frame.
Grass collector & Frame (fig. 1)
Place the Frame into the Grass Collector
(fig. 2).
Ensure the carry handle remains outside of
the Collector (fig. 3).
Start attaching the Collector to the Frame
(fig. 4).
fig. 2
fig. 5
fig. 8
Attach the top sections first (fig. 5).
Attach the side sections (fig. 6).
Ensure the Grass Collector sides sit inside
the Frame when attaching the lower section
of the Collector (fig. 7).
The finished Collector (fig. 8).
fig. 3
fig. 6