Webb WERR17P Operator's Manual & Parts List page 6

m the carton. Assemble as follows:
e machine and all components from the carton. Assemble as follows: Remove the machine and all components from the carton. Assemble as follows:
ix with two cap
1a. Select the left hand
d elect the left hand
nuts.
the two studs on the
wo studs on the
right hand side of the
hand side of the
mower, ensure that the
er, ensure that the he
43SPBR 17" Roller model
Y INSTRUCTIONS - LF43SPBR 17" Roller model
SSEMBLY INSTRUCTIONS - LF43SPBR 17" Roller model
U shape of the handle
ape of the handle e
INSTRUCTION MANUAL INSTRUCTION MANUAL
goes towards the
towards the
chassis
sis .
m the carton. Assemble as follows:
e machine and all components from the carton. Assemble as follows: Remove the machine and all components from the carton. Assemble as follows:
ssemble the upper
fig. 1a
2. Select the right hand
elect the right hand nd
d le to the lower
elect the left hand
ix with two cap
le using the two nuts.
the two studs on the left
wo studs on the left eft
o studs on the
p bolts and nuts,
hand side of the mower,
hand side of the er, side of the mower,
ring that the large
ensure that the U shape of the handle
e
r, ensure that the
pe of the handle re that the U shape of the handle
her goes against the
e goes towards the
pe of the handle
towards the
p handle on the
towards the
chassis. Fix with two
sis. Fix with two
de of the handle
sis .
cap head nuts.
head nuts.
er the photo.
ssemble the upper
fig. 3
nd lect the right hand
nsion clamp bolts
4.
le to the lower
sure the handles
wire recoil rope guide
recoil rope guide
le using the two
wo studs on the left eft
to the right hand clamp
e right hand clamp p
p bolts and nuts,
er,
side of the mower,
bolt, this goes on the
this goes on the
ring that the large
re that the U shape of the handle pe of the handle
inside of the handle
e of the handle
her goes against the
towards the
between the handle
een the handle
p handle on the
sis. Fix with two
and the securing nut.
he securing nut.
de of the handle
ead nuts.
er the photo.
the Self Propelled
6. Fit the Operator
the Operator
fig. 6
cable, again
nsion clamp bolts
Presence Cable,
ence Cable,
ve the lever from
sure the handles
ecoil rope guide
remove the lever from
ve the lever from
ounting by gen-
p
e right hand clamp
its mounting by easing it
g it ounting by easing it
sing it from the
his goes on the
from the handle, attach
the handle, attach h
e, attach the Z
e of the handle
the Z cable end to the
cable end to the
end to the Self
een the handle
OPC lever as shown in
n lever as shown in
elled drive lever as
he securing nut.
lever to the handle.
to the handle.
ver to the handle.
the Self Propelled
the Operator
fig. 9
it the cable router
8. Ensure you have
cable, again sure you have
ence Cable,
e handle using the attached the correct
hed the correct
ve the lever from
ve the lever from
cable to the correct
ring bolt supplied,
e to the correct
ounting by gen-
g it
ounting by easing it
lever.
. 8)
sing it from the
h the handle, attach
nside of the handle
e, attach the Z
cable end to the
er the photo.
end to the Self
n
lever as shown in
elled drive lever as
to the handle.
ver to the handle.
Select the left hand lower handle and fix to
et the grass bag
sure you have
10. Hold in the
it the cable router
Hold in the
the two studs on the right hand side of the
rass bag frame
hed the correct
Operator control handle
e handle using the
ator control handle le
mower, ensure that the U shape of the
her then lock the
to the correct
and pull on the recoil
ring bolt supplied,
pull on the recoil
handle goes towards the chassis (fig. 1a).
c buckles on the
8)
starter rope so you can
er rope so you can n
bag frame.
attach it through the
nside of the handle
h it through the
Fix with two cap head nuts (fig. 1b).
wire recoil rope guide.
er the photo.
. recoil rope guide.
Select the right hand lower handle and fix to
the two studs on the left hand side of the
mower, ensure that the U shape of the
handle goes towards the chassis.
et the grass bag
old in the
Fix with two cap head nuts (fig. 2).
rass bag frame le
ator control handle
pull on the recoil her then lock the
Assemble the upper handle to the lower
c buckles on the n
er rope so you can
handle using the two clamp bolts and nuts,
h it through the bag frame.
ensuring that the large washer goes against
ecoil rope guide.
the clamp handle on the outside of the
handle as per the photo (fig 3).
chassis chassis . .
Remove the machine and all components from the carton. Assemble as follows: Remove the machine and all components from the carton. Assemble as follows: Remove the machine and all components from the carton. Assemble as follows:
2. Select the right hand 2. Select the right hand
1a. Select the left hand 1a. Select the left hand
1b. Fix with two cap 1b. Fix with two cap
head nuts. head nuts.
the two studs on the the two studs on the left the two studs on the the two studs on the left
right hand side of the right hand side of the
hand side of the mower, hand side of the mower,
mower, ensure that the mower, ensure that the
ensure that the U shape of the handle ensure that the U shape of the handle
U shape of the handle U shape of the handle
goes towards the goes towards the
goes towards the goes towards the
chassis. Fix with two chassis. Fix with two
chassis chassis . . .
cap head nuts. cap head nuts.
2. Select the right hand 2. Select the right hand
3. Assemble the upper 3. Assemble the upper
1b. Fix with two cap 1b. Fix with two cap
4. 4.
handle to the lower handle to the lower
head nuts.
head nuts.
wire recoil rope guide wire recoil rope guide
the two studs on the left the two studs on the left
handle using the two handle using the two
to the right hand clamp to the right hand clamp
hand side of the mower, hand side of the mower,
clamp bolts and nuts, clamp bolts and nuts,
bolt, this goes on the bolt, this goes on the
ensure that the U shape of the handle ensure that the U shape of the handle
ensuring that the large ensuring that the large
inside of the handle inside of the handle
goes towards the goes towards the
washer goes against the washer goes against the
between the handle between the handle
chassis. Fix with two chassis. Fix with two
clamp handle on the clamp handle on the
and the securing nut. and the securing nut.
cap head nuts. cap head nuts.
outside of the handle outside of the handle
as per the photo. as per the photo.
3. Assemble the upper 3. Assemble the upper
6. Fit the Operator 6. Fit the Operator
4. 4.
5. Tension clamp bolts 5. Tension clamp bolts
handle to the lower handle to the lower
Presence Cable, Presence Cable,
wire recoil rope guide wire recoil rope guide
to ensure the handles to ensure the handles
handle using the two
handle using the two
remove the lever from remove the lever from
to the right hand clamp to the right hand clamp
clamp bolts and nuts, clamp bolts and nuts,
its mounting by easing it its mounting by easing it
bolt, this goes on the bolt, this goes on the
ensuring that the large ensuring that the large
from the handle, attach from the handle, attach
inside of the handle inside of the handle
washer goes against the
washer goes against the
the Z cable end to the the Z cable end to the
between the handle between the handle
clamp handle on the clamp handle on the
OPC lever as shown in OPC lever as shown in
and the securing nut. and the securing nut.
outside of the handle outside of the handle
as per the photo.
as per the photo.
lever to the handle. lever to the handle.
6. Fit the Operator 6. Fit the Operator
7. Fit the Self Propelled 7. Fit the Self Propelled
5. Tension clamp bolts 5. Tension clamp bolts
8. Ensure you have 8. Ensure you have
Presence Cable, Presence Cable,
drive cable, again drive cable, again
to ensure the handles to ensure the handles
attached the correct attached the correct
remove the lever from remove the lever from
remove the lever from remove the lever from
cable to the correct cable to the correct
its mounting by easing it its mounting by easing it
its mounting by gen- its mounting by gen-
lever. lever. 8) 8)
from the handle, attach from the handle, attach
tly easing it from the tly easing it from the
the Z cable end to the the Z cable end to the
handle, attach the Z handle, attach the Z
OPC lever as shown in OPC lever as shown in
cable end to the Self cable end to the Self
Propelled drive lever as Propelled drive lever as
lever to the handle. lever to the handle.
the lever to the handle. the lever to the handle.
7. Fit the Self Propelled
7. Fit the Self Propelled
8. Ensure you have 8. Ensure you have
drive cable, again drive cable, again
10. Hold in the 10. Hold in the
9. Fit the cable router 9. Fit the cable router
attached the correct attached the correct
remove the lever from remove the lever from
Operator control handle Operator control handle
to the handle using the to the handle using the
cable to the correct cable to the correct
its mounting by gen-
its mounting by gen-
and pull on the recoil and pull on the recoil
securing bolt supplied, securing bolt supplied,
8) lever. lever. 8) 8)
tly easing it from the tly easing it from the
starter rope so you can starter rope so you can
handle, attach the Z
handle, attach the Z
attach it through the attach it through the
the inside of the handle the inside of the handle
cable end to the Self cable end to the Self
wire recoil rope guide. wire recoil rope guide.
as per the photo. as per the photo.
Propelled drive lever as Propelled drive lever as
the lever to the handle. the lever to the handle.
10. Hold in the 10. Hold in the
9. Fit the cable router 9. Fit the cable router
11. Set the grass bag 11. Set the grass bag
Operator control handle Operator control handle
to the handle using the
and grass bag frame and grass bag frame to the handle using the
and pull on the recoil and pull on the recoil
securing bolt supplied, securing bolt supplied,
together then lock the together then lock the
starter rope so you can starter rope so you can
plastic buckles on the plastic buckles on the
attach it through the attach it through the
the inside of the handle the inside of the handle
grass bag frame. grass bag frame.
wire recoil rope guide. wire recoil rope guide.
as per the photo. as per the photo.
11. Set the grass bag 11. Set the grass bag
and grass bag frame
and grass bag frame
together then lock the together then lock the
plastic buckles on the
plastic buckles on the
grass bag frame.
grass bag frame.
chassis chassis
Remove the machine and all components from the carton.
2. Select the right hand 2. Select the right hand
1a. Select the left hand 1a. Select the left hand
1b. Fix with two cap
the two studs on the left the two studs on the left
head nuts.
the two studs on the the two studs on the
hand side of the mower, hand side of the mower,
right hand side of the right hand side of the
ensure that the U shape of the handle ensure that the U shape of the handle
mower, ensure that the mower, ensure that the
goes towards the goes towards the
U shape of the handle U shape of the handle
chassis. Fix with two chassis. Fix with two
goes towards the goes towards the
cap head nuts. cap head nuts.
chassis chassis
fig. 1b
2. Select the right hand 2. Select the right hand
3. Assemble the upper
4. 4.
handle to the lower
wire recoil rope guide wire recoil rope guide
the two studs on the left the two studs on the left
to the right hand clamp to the right hand clamp handle using the two
hand side of the mower, hand side of the mower,
bolt, this goes on the bolt, this goes on the clamp bolts and nuts,
ensure that the U shape of the handle ensure that the U shape of the handle
ensuring that the large
inside of the handle inside of the handle
goes towards the goes towards the
between the handle between the handle washer goes against the
chassis. Fix with two chassis. Fix with two
clamp handle on the
and the securing nut. and the securing nut.
cap head nuts. cap head nuts.
outside of the handle
as per the photo.
6. Fit the Operator 6. Fit the Operator
fig. 4
4. 4.
Presence Cable, Presence Cable,
5. Tension clamp bolts
wire recoil rope guide wire recoil rope guide
remove the lever from remove the lever from
to ensure the handles
to the right hand clamp to the right hand clamp
its mounting by easing it its mounting by easing it
bolt, this goes on the bolt, this goes on the
from the handle, attach from the handle, attach
inside of the handle inside of the handle
the Z cable end to the the Z cable end to the
between the handle between the handle
OPC lever as shown in OPC lever as shown in
and the securing nut. and the securing nut.
lever to the handle. lever to the handle.
6. Fit the Operator 6. Fit the Operator
7. Fit the Self Propelled
8. Ensure you have 8. Ensure you have
fig. 7
Presence Cable, Presence Cable,
drive cable, again
attached the correct attached the correct
remove the lever from remove the lever from
remove the lever from
cable to the correct cable to the correct
its mounting by easing it its mounting by easing it
lever. its mounting by gen- lever.
from the handle, attach from the handle, attach
tly easing it from the
the Z cable end to the the Z cable end to the
handle, attach the Z
OPC lever as shown in OPC lever as shown in
cable end to the Self
Propelled drive lever as
lever to the handle. lever to the handle.
the lever to the handle.
10. Hold in the 10. Hold in the
8. Ensure you have 8. Ensure you have
9. Fit the cable router
fig. 10
Operator control handle Operator control handle
attached the correct attached the correct
to the handle using the
cable to the correct and pull on the recoil cable to the correct and pull on the recoil
securing bolt supplied,
starter rope so you can lever. lever. starter rope so you can
attach it through the attach it through the
the inside of the handle
wire recoil rope guide. wire recoil rope guide.
as per the photo.
Place the wire recoil rope guide to the right
10. Hold in the 10. Hold in the
11. Set the grass bag
hand clamp bolt, this goes on the inside of
Operator control handle Operator control handle
and grass bag frame
the handle between the handle and the
and pull on the recoil and pull on the recoil
together then lock the
securing nut (fig. 4).
starter rope so you can starter rope so you can
plastic buckles on the
attach it through the attach it through the
grass bag frame.
Tension the clamp bolts to ensure the
wire recoil rope guide. wire recoil rope guide.
handles firmly lock together (fig. 5).
Fit the Operator Presence Cable, remove
the lever from its mounting by easing it from
the handle, attach the Z cable end to the
OPC lever as shown in lever to the handle
(fig. 6).
Fit the Self Propelled drive cable, a(RR17SP
Only) gain remove the lever from its
mounting by gently easing it from the
handle, attach the Z cable end to the Self
Propelled drive lever & refit the lever to the
handle (fig . 7).
. .
Remove the machine and all components from the carto
3. Assemble the upper 3. Assemble the upper
1b. Fix with two cap 1b. Fix with two cap
handle to the lower handle to the lower
head nuts. head nuts.
handle using the two handle using the two
clamp bolts and nuts, clamp bolts and nuts,
ensuring that the large ensuring that the large
washer goes against the washer goes against the
clamp handle on the clamp handle on the
. .
outside of the handle outside of the handle
as per the photo. as per the photo.
fig. 2
3. Assemble the upper 3. Assemble the upper
5. Tension clamp bolts 5. Tension clamp bolts
handle to the lower handle to the lower
to ensure the handles to ensure the handles
handle using the two handle using the two
clamp bolts and nuts, clamp bolts and nuts,
ensuring that the large ensuring that the large
washer goes against the washer goes against the
clamp handle on the clamp handle on the
outside of the handle outside of the handle
as per the photo. as per the photo.
fig. 5
7. Fit the Self Propelled 7. Fit the Self Propelled
5. Tension clamp bolts 5. Tension clamp bolts
drive cable, again drive cable, again
to ensure the handles to ensure the handles
remove the lever from remove the lever from
its mounting by gen- its mounting by gen-
tly easing it from the tly easing it from the
handle, attach the Z handle, attach the Z
cable end to the Self cable end to the Self
Propelled drive lever as Propelled drive lever as
the lever to the handle. the lever to the handle.
7. Fit the Self Propelled 7. Fit the Self Propelled
fig. 8
drive cable, again drive cable, again
9. Fit the cable router 9. Fit the cable router
remove the lever from remove the lever from
to the handle using the to the handle using the
its mounting by gen- its mounting by gen-
8) 8)
securing bolt supplied, securing bolt supplied,
tly easing it from the tly easing it from the
handle, attach the Z handle, attach the Z
the inside of the handle the inside of the handle
cable end to the Self cable end to the Self
as per the photo. as per the photo.
Propelled drive lever as Propelled drive lever as
the lever to the handle. the lever to the handle.
9. Fit the cable router 9. Fit the cable router
11. Set the grass bag 11. Set the grass bag
to the handle using the to the handle using the
and grass bag frame and grass bag frame
securing bolt supplied, securing bolt supplied,
together then lock the together then lock the
8) 8)
plastic buckles on the plastic buckles on the
the inside of the handle the inside of the handle
grass bag frame. grass bag frame.
as per the photo. as per the photo.
Ensure you have attached the correct cable
11. Set the grass bag 11. Set the grass bag
to the correct lever (fig. 8).
and grass bag frame and grass bag frame
together then lock the together then lock the
Fit the cable router to the handle using the
plastic buckles on the plastic buckles on the
securing bolt supplied, this should be fitted
grass bag frame. grass bag frame.
to the inside of the handle (fig. 9).
Hold in the Operator control handle and
pull on the recoil starter rope so you can
attach it through the wire recoil rope guide
(fig. 10).
3. Assemble the up 3. Assemble the
handle to the lower handle to the low
1b. Fix with two cap 1b. Fix with two c
head nuts. head nuts.
handle using the tw handle using the
clamp bolts and nut clamp bolts and n
ensuring that the la ensuring that the
washer goes agains washer goes aga
clamp handle on th clamp handle on
outside of the hand outside of the han
as per the photo. as per the photo.
3. Assemble the up 3. Assemble the
5. Tension clamp bo 5. Tension clamp
handle to the lower handle to the low
to ensure the handl to ensure the han
handle using the tw handle using the
clamp bolts and nu clamp bolts and n
ensuring that the la ensuring that the
washer goes again washer goes aga
clamp handle on th clamp handle on
outside of the hand outside of the ha
as per the photo. as per the photo.
7. Fit the Self Prope 7. Fit the Self Pro
drive cable, again drive cable, again
5. Tension clamp bo 5. Tension clamp
remove the lever fro to ensure the handl remove the lever to ensure the han
its mounting by gen- its mounting by ge
tly easing it from the tly easing it from t
handle, attach the Z handle, attach the
cable end to the Sel cable end to the S
Propelled drive leve Propelled drive le
the lever to the hand the lever to the ha
7. Fit the Self Prope 7. Fit the Self Pro
9. Fit the cable rou 9. Fit the cable r
drive cable, again drive cable, again
to the handle using to the handle usin
remove the lever fro remove the lever
securing bolt suppli securing bolt sup
its mounting by gen its mounting by ge
tly easing it from the tly easing it from t
the inside of the ha the inside of the h
handle, attach the Z handle, attach the
as per the photo. as per the photo.
cable end to the Sel cable end to the S
Propelled drive leve Propelled drive le
the lever to the hand the lever to the ha
11. Set the grass ba 11. Set the grass b
9. Fit the cable rou 9. Fit the cable r
and grass bag frame and grass bag fram
to the handle using to the handle usin
together then lock th together then lock
securing bolt suppli securing bolt sup
plastic buckles on th plastic buckles on
grass bag frame. grass bag frame.
the inside of the ha the inside of the h
as per the photo. as per the photo.
11. Set the grass ba 11. Set the grass b
and grass bag frame and grass bag fram
together then lock th together then lock
plastic buckles on th plastic buckles on
grass bag frame. grass bag frame.