Fujitsu LifeBook E Series Instructions Manual page 85

Hide thumbs Also See for LifeBook E Series:
Table of Contents

Advertisement

Problem
Keyboard or Mouse Problems
The notebook has gone
The built-in
into Suspend mode.
keyboard does
not seem to work.
Your application has
locked out your keyboard.
The NumLock key is set.
Your external device is
You have installed
notproperly installed.
an external
keyboard or
Your operating system
mouse, and it does
software is not set up with
not seem to work.
the correct driver for that
device.
Your mouse or keyboard
is connected to the wrong
PS/2 port on the LAN
Dock.
You have con-
Your operating system
nected an external
software is not setup with
keyboard or a
the correct software driver
mouse and it
for that device.
seems to be
Your system has crashed.
locking up the
system.
Memory Problems
Your Power On
Your memory upgrade
screen, or Main
module is not properly
menu of the BIOS
installed.
setup utility
information,
You have a memory
does not show the
failure.
correct amount of
installed memory.
Possible Cause
Tr o u b l e s h o o t i n g
Possible Solution
Push the Power and Suspend/Resume button.
Try to use your intergrated pointing device to
restart your system. If this fails, turn your
LifeBook notebook off using the power switch,
wait 10 seconds or more, and then turn it back
on.
Press the NumLock key to reset it.
Reinstall your device.
Check your device and operating system
documentation and activate the proper driver.
Plug the mouse into the PS/2 Mouse port and
the external keyboard or numeric key pad into
the PS/2 Keyboard port.
Check your device and operating system
documentation and activate the proper driver.
Try to restart your LifeBook notebook. If that
fails, turn off the power using the power
switch, wait at least 10 seconds, and then
power on.
Remove and reinstall your memory upgrade
module.
Check for Power On Self Test (POST)
messages.
75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents