Setting Of Channels During Ad Hoc Connection; Troubleshooting; Unavailable Connection To The Network - Fujitsu LifeBook E Series Instructions Manual

L i f e B o o k E S e r i e s - S e c t i o n 4
1. Click the [Start] button, [All Programs],
[Intel Network Adapter], and [Intel(R)
PROSet], in that order.
The Intel(R) PROSet window will be dis-
played.
2. Click [Adapter] tab.
3. Click [Configure] in [Power setting].
[Power setting] window will be displayed.
4. Control the "Transmission power (ad
hoc)" bar to set the transmission power.
Setting of channels during
ad hoc connection
You can set channels during ad hoc con-
nection.
Channel 11 is set by default.
In case of connecting to the existing ad
hoc network, no channel setting will be
effective.
This setting is only effective during ad
hoc connection. It will be ineffective dur-
ing infrastructure connection.
64
1. Click the [Start] button, [ All Programs],
[Intel Network Adapter], and [Intel(R)
PROSet], in that order.
The Intel(R) PROSet window will be
displayed.
2. Click [Adapter] tab.
3. Click [Setting] in [Ad hoc setting].
[Ad hoc setting] window will be displayed.
4. Change channels during ad hoc
connection.

Troubleshooting

Causes and countermeasures for troubles you
may encounter while using wireless LAN are
described. Refer to the relevant item.
Unavailable connection to
the network
After you have finished the network setup op-
erations, access the folder whose sharing has
been set for other personal computers. Also,
confirm the status of the radio waves in case of
trouble such as a network connection failure.
Causes
"Incorrect network name (SSID) or network
key"
"Unreachable electric wave due to poor con-
dition of electric wave"
"Under the condition of stopped electric wave
transmission"
"The computer to be connected with is turned
OFF."
"Active channel duplication due to multiple
wireless LAN networks on the same floor, etc."
"No right of access to the network to be con-
nected with"
"The set channel for the Access Point is dif-
ferent from those which can be used by this
computer."
"It takes too long to retrieve the network and
display the connected computers."
"Incorrectly-performed network setting"